APC Daughter2
About the APC Daughter2 PCB
APC Daughter2 is an open source PCB design by leonardobove, published on GitHub. It is a 2-layer board measuring 42.4 × 29.3 mm, with 17 components from 15 distinct parts.
Other key parts include the AD8319ACPZ-R7, HMC658LP2E, EP2W1+ and MAAT-010521-L1TR05. By type, the board carries 5 capacitors, 4 ICs, 4 connectors and 2 resistors.
From the project
QPCB: Quantum Pulse Conversion Board
Main components on the APC Daughter2
APC Daughter2 bill of materials (BOM)
17 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD8319ACPZ-R7 | SON50P200X300X80-9N-D | IC1 |
| 1 | HMC658LP2E | SON65P200X200X105-7N | IC2 |
| 1 | EP2W1+ EP2W1_ | DG1677-2_MNC | U1 |
| 1 | MAAT-010521-L1TR05 TFA32C10DB | tfa0603 | U2 |
| 2 | CONN_01X05 Conn_Coaxial | SMAJPHSTTH1 | J1, J2 |
| 2 | Conn_01x05 | PinSocket_1x05_P2.54mm_Vertical | J3, J4 |
| 1 | MAAT-010521-L1TR05 | QFN50P300X300X100-17N-D | 1 |
| 1 | 1n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | CFLT1 |
| 1 | 0.1U 47n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3 |
| 1 | 100P 100p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 47n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6 |
| 1 | 1u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | 52.3 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R13 |
APC Daughter2 design files
The KiCad project lives in the leonardobove/qpcb repository on GitHub; these links point at the commit this page was built from.
APC Daughter2: common questions
How big is the APC Daughter2 PCB?
The APC Daughter2 measures 42.4 × 29.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the APC Daughter2?
17 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the APC Daughter2 design files?
From the leonardobove/qpcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the APC Daughter2 design in my own project?
The repository has no license, so all rights stay with leonardobove. Use it as a reference, and ask the author before reusing the design.
More boards in qpcb
RP2040/RP2350Qpcb
280 × 205 mm226 parts2LNo license0
RP2040/RP2350LO mother
89.9 × 66 mm29 parts2LNo license0
RP2040/RP2350APC Mother
132.5 × 100 mm21 parts2LNo license0
Amplifier
35.6 × 26.2 mm16 parts2LNo license0
RP2040/RP2350Yig current regulator
59.1 × 59.1 mm13 parts2LNo license0
Mixer
42.3 × 22.9 mm7 parts2LNo license0
LO daughter
47.8 × 42.4 mm3 parts2LNo license0