HardLabs

APC Mother

leonardobove·qpcb·hardware/apc/kicad/APC_Mother/APC_Mother.kicad_pcb

APC Mother PCB layout, top view — open source RP2040/RP2350 board by leonardobove
Simulate this board

About the APC Mother PCB

APC Mother is an open source RP2040/RP2350 PCB design by leonardobove, published on GitHub. It is a 2-layer board measuring 132.5 × 100 mm, with 21 components from 15 distinct parts.

Its main chip is the NCR2-113+, from the RP2040/RP2350 family. Other key parts include the DAC8562TDGSR and EP2W+. By type, the board carries 11 resistors, 4 capacitors, 3 ICs and 3 connectors.

From the project

QPCB: Quantum Pulse Conversion Board

Main components on the APC Mother

DAC8562TDGSRNCR2-113+EP2W+

APC Mother bill of materials (BOM)

21 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DAC8562TDGSR
IC2
1
NCR2-113+
Pico
U3
1
EP2W+
LT1632CN8-PBF
U4
2
CONN_01X09
Conn_01x05
J1, J2
1
SMA-J-P-H-ST-TH1
Conn_01x03
J3
1
0.1U
1 uF
C1
2
0.1U
100 nF
C2, C3
1
10P
100 nF
C4
1
100
R
R1
1
4.7K
GR
R2
3
R
R3, R5, R6
1
430
GR
R4
2
GR
R7, R8
1
4.7k
R9
2
10k
R11, R12

APC Mother design files

The KiCad project lives in the leonardobove/qpcb repository on GitHub; these links point at the commit this page was built from.

APC Mother: common questions

What microcontroller does the APC Mother use?

The APC Mother is built around the NCR2-113+, from the RP2040/RP2350 family.

How big is the APC Mother PCB?

The APC Mother measures 132.5 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the APC Mother?

21 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the APC Mother design files?

From the leonardobove/qpcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the APC Mother design in my own project?

The repository has no license, so all rights stay with leonardobove. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the APC Mother without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in qpcb

Similar boards