BCD-watch
LHelge·BCD-watch·HW/PCB_CR2032/PCB_CR2032.kicad_pcb
About the BCD-watch PCB
BCD-watch is an open source STM32 PCB design by LHelge, published on GitHub under the MIT license. It is a 4-layer board measuring 39 × 48 mm, with 76 components from 19 distinct parts.
Its main chip is the STM32L071CBTx, from the STM32 family. Other key parts include the LIS3DHTR. By type, the board carries 29 resistors, 12 capacitors, 9 switches, 8 modules, 3 connectors and 3 diodes.
It belongs with the wearables designs in this gallery.
From the project
BCD-watch
Reference | Value | Make | Mouser part# | Part | Qty --------- | ----- | ---- | ---- | ------ | --- BT1 | CR2032 | Linx | 712-BAT-HLD-001 | BAT-HLD-001 | 1 C1, C2 | 20pF | Yageo | 603-CC805JRNPO9BN200 | CC0805JRNPO9BN200 | 2 C4-C9, C14, C15 | 100nF | Yageo | 603-CC805KRX7R9BB104 | CC0805KRX7R9BB104 | 8 C12 | 11mF | SII | 628-CPH3225A-2K | CPH3225A | 1 C3, C11, C13 | 10uF | Yageo | 603-CC805KKX7R6BB106 | CC0805KKX7R6BB106 | 3 D1-D3 | BAR43CFILM | ST | 511-BAR43CFILM | BAR43CFILM | 3 H00-H03, H10-H13, M00-M03, M10-M13, S00-S03, S10-S13 | LED | Kingbright | 604-APTR3216SECKJ3 |…
Main components on the BCD-watch
BCD-watch bill of materials (BOM)
76 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L071CBTx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | LIS3DHTR LIS3DH | LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U2 |
| 8 | LED | LED_1206_3216Metric | M00, M01, M02, M03, M10, M11, M12, M13 |
| 1 | 32.768KHZ 32768 Hz | FC-135 | Y1 |
| 1 | STDC14 | PinHeader_2x07_P1.27mm_Vertical_SMD | J1 |
| 1 | Breakoff | PinHeader_1x07_P1.27mm_Vertical | J2 |
| 1 | PWR | PinHeader_1x02_P1.27mm_Vertical | J3 |
| 1 | CR2032 | BAT-HLD-001-xx-OTL | BT1 |
| 8 | LED | LED_1206_3216Metric | H00, H01, H02, H03, H10, H11, H12, H13 |
| 8 | LED | LED_1206_3216Metric | S00, S01, S02, S03, S10, S11, S12, S13 |
| 1 | WAKE | WS-TASU SMT Tact Switch | SW1 |
| 3 | BAR43CFILM | SOT-23_Handsoldering | D1, D2, D3 |
| 2 | 20PF 20pF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2 |
| 2 | 10UF 10uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C13 |
| 7 | 100NF 100nF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4, C5, C6, C7, C9, C14, C15 |
| 1 | 11mF | CPH3225A | C12 |
| 24 | 1k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +16 |
| 4 | 10K 10k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R27, R28, R29, R31 |
| 1 | 100 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R30 |
BCD-watch design files
The KiCad project lives in the LHelge/BCD-watch repository on GitHub; these links point at the commit this page was built from.
BCD-watch: common questions
What microcontroller does the BCD-watch use?
The BCD-watch is built around the STM32L071CBTx, from the STM32 family.
How big is the BCD-watch PCB?
The BCD-watch measures 39 × 48 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the BCD-watch?
76 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BCD-watch design files?
From the LHelge/BCD-watch repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the BCD-watch design in my own project?
Yes, under the terms of its MIT license, which LHelge chose for the repository.
Can I test firmware for the BCD-watch without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k