28 open source boards using the LIS3DHTR
Real designs built with the LIS3DHTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Omote
OMOTE-Community
192.4 × 50 mm135 parts2LGPL-3.0153Microchip SAM
CircuitPythonBadge
neubauek
90 × 90 mm62 parts2LNo license4RP2040/RP2350
Pxlboard
taciturnaxolotl
72.8 × 83.8 mm79 parts2LMIT2STM32
BCD-watch
LHelge
39 × 48 mm76 parts4LMIT1ESP32
DSH-DEX
DSHSTUDIOS
47 × 46.5 mm58 parts2LNo license1ESP32
Vancontroller
Camperlux
230 × 135 mm247 parts4LCustom license0ESP32
Omote
KlausMu
192.4 × 50 mm135 parts2LGPL-3.00RP2040/RP2350
OMOTE
Porshe2010
192.4 × 50 mm105 parts2LGPL-3.00STM32
Copperhead stm32-data logger
copperheadhq
50 × 70 mm84 parts4LCustom license0Microchip SAM
Acoustic impact ball
akornsys-rdi
38 × 90 mm70 parts2LGPL-3.00ESP32
Cube hologram
Honzaaa45
48 × 52 mm55 parts4LMIT0Default
glovepost
31.2 × 28.2 mm37 parts2LMIT0AVR/Arduino
AAquad
Fberbari
69.2 × 47.6 mm37 parts2LGPL-3.00RISC-V
Keychain
antelliJ
100 × 65.8 mm33 parts2LMIT0ESP32
Dog tracker
jonathanleahy
30 × 20 mm27 parts2LNo license0A Team ECE411 accel bb
eceteresa
17.8 × 25.4 mm27 parts2LGPL-3.00RP2040/RP2350
Remote
OMOTE-Community
192.4 × 50 mm105 parts2LGPL-3.0153Nordic nRF
Carrier
bhadkamkar9snehil
62 × 28 mm44 parts4LMIT1RP2040/RP2350
Remote
KlausMu
192.4 × 50 mm105 parts2LGPL-3.00Nordic nRF
Keychain rev b
olerast67
30 × 52.5 mm49 parts4LApache-2.00RP2040/RP2350
Sensor node
mohan-bee
54 × 50 mm44 parts2LNo license0Example
glovepost
29 parts2LMIT0ESP32
Dog tracker routed
jonathanleahy
30 × 23 mm27 parts2LNo license0Nordic nRF
Carrier chk
bhadkamkar9snehil
62 × 28 mm44 parts4LMIT1Lis3dhtr
glovepost
4 × 4.1 mm3 parts2LMIT0STM32
Sense
sean618
27 × 25 mm36 parts2LMIT0STM32
LightSound
sean618
27 × 25 mm32 parts2LMIT0ESP32
Esp32 lis3dh
HeyPCB
30 × 48 mm25 parts4LCERN-OHL-S-2.00
How designs wire the LIS3DHTR
Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the LIS3DHTR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD_IO pin has a decoupling capacitor on 19 of 22 designs, most often 100 nF (then 10 µF).
- The SCL/SPC pin has a pull-up to 3.3V on 19 of 22 designs, most often 4.7 kΩ (then 10 kΩ).
- The VDD pin has a decoupling capacitor on 19 of 21 designs, most often 100 nF (then 10 µF).
- The SDA/SDI/SDO pin has a pull-up to 3.3V on 18 of 22 designs, most often 4.7 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDD_IOpin 1 | Connected to: 3.3V 91% |
|
| NCpin 2, 3 | Connected to: Not connected 100% | — |
| SCL/SPCpin 4 | Connected to: The microcontroller 77%, a connector 27% |
|
| GNDpin 5, 12 | Connected to: GND 93% | — |
| SDA/SDI/SDOpin 6 | Connected to: The microcontroller 73%, a connector 27% |
|
| CSpin 8 | Connected to: 3.3V 82% | — |
| INT2pin 9 | Connected to: Not connected 64% · a signal 32% | — |
| RESpin 10 | Connected to: GND 86% | — |
| ADC3pin 13 | Connected to: Not connected 73% · GND 18% | — |
| VDDpin 14 | Connected to: 3.3V 90% |
|
| ADC2pin 15 | Connected to: Not connected 77% | — |
| ADC1pin 16 | Connected to: Not connected 73% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omote by OMOTE-Community, CircuitPythonBadge by neubauek, Pxlboard by taciturnaxolotl and Carrier by bhadkamkar9snehil.
The LIS3DHTR in open source designs
The gallery holds 28 open source boards using the LIS3DHTR from 21 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 47 components.
71% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Omote by OMOTE-Community.
Parts used alongside the LIS3DHTR
Microcontrollers on boards using the LIS3DHTR
What boards using the LIS3DHTR are built for
LIS3DHTR: common questions
Where can I find a LIS3DHTR reference design?
Each of the 28 boards on this page is a real design using the LIS3DHTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LIS3DHTR VDD_IO pin?
The VDD_IO pin has a decoupling capacitor on 19 of 22 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 22 open source designs using the LIS3DHTR.
What pull-up resistor is used on the LIS3DHTR SCL/SPC pin?
The SCL/SPC pin has a pull-up to 3.3V on 19 of 22 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 22 open source designs using the LIS3DHTR.
What decoupling capacitors do designs use on the LIS3DHTR VDD pin?
The VDD pin has a decoupling capacitor on 19 of 21 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 22 open source designs using the LIS3DHTR.
What parts are used alongside the LIS3DHTR?
The USBLC6-2SC6, AP2112K-3.3, CH340C, ESP32-PICO-D4 and ESP32-S3-WROOM-1-N16R8 appear in the most repositories here.
Which microcontrollers do boards using the LIS3DHTR use?
Most are built on ESP32 (8), RP2040/RP2350 (5), STM32 (4) and Nordic nRF (3).
How big is a typical board using the LIS3DHTR?
The median is 50 × 50 mm, and 71% are two-layer designs.
What is the most popular open source board using the LIS3DHTR?
By GitHub stars, Omote by OMOTE-Community, with 153 stars.
Can I simulate one of these boards using the LIS3DHTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.