Powermod
lightside-instruments·powermod
About the Powermod PCB
Powermod is an open source PCB design by lightside-instruments, published on GitHub. It is a 4-layer board measuring 27 × 18 mm, with 16 components from 13 distinct parts.
Other key parts include the TPS54202. By type, the board carries 6 capacitors, 6 resistors, 2 connectors, 1 IC and 1 inductor.
From the project
powermod-tps54202 is a simple DC-DC regulator board developed by Lightside Instruments AS.
powermod-tps54202 is a simple DC-DC regulator board developed by Lightside Instruments AS.
The project includes schematic and PCB design files for KiCAD.
The project is published by Lightside Instruments AS under TAPR Open Hardware License. Read the LICENSE file for details.
==Calculating the EN pin resistor pair== According to the tps54202h.pdf (SLVSDG7A – APRIL 2016 – REVISED APRIL 2021) there is a formula for calculating the resistor pair to be used for driving the EN pin:
Main components on the Powermod
Powermod bill of materials (BOM)
16 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS54202 | SOT-23-6 | U1 |
| 2 | CONN_02X06_ODD_EVEN Conn_02x07_Odd_Even | PinHeader_2x07_P2.00mm_Vertical_SMD | J1, J2 |
| 1 | 15UH 15uH | L_Taiyo-Yuden_MD-5050 | L1 |
| 1 | 10UF 10uF | C_0603_1608Metric | C1 |
| 2 | 0.1UF 0.1uF | C_0402_1005Metric | C2, C3 |
| 2 | 22UF 22uF | C_0805_2012Metric | C4, C5 |
| 1 | 75PF 75 pF | C_0402_1005Metric | C6 |
| 1 | 49.9 | R_0402_1005Metric | R1 |
| 1 | 100K | R_0402_1005Metric | R2 |
| 1 | 13.3K | R_0402_1005Metric | R3 |
| 1 | 511K | R_0402_1005Metric | R4 |
| 1 | 105K | R_0402_1005Metric | R5 |
| 1 | 0 | R_0402_1005Metric | R6 |
Powermod design files
The KiCad project lives in the lightside-instruments/powermod repository on GitHub; these links point at the commit this page was built from.
- Layoutpowermod.kicad_pcb
- Schematicpowermod.kicad_sch
- BOMjlcpcb/bom.csv
Powermod: common questions
How big is the Powermod PCB?
The Powermod measures 27 × 18 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Powermod?
16 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Powermod design files?
From the lightside-instruments/powermod repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Powermod design in my own project?
The repository has no license, so all rights stay with lightside-instruments. Use it as a reference, and ask the author before reusing the design.