EMG wireless interconnect
About the EMG wireless interconnect PCB
EMG wireless interconnect is an open source PCB design by limblab, published on GitHub. It is a 2-layer board measuring 32 × 48.4 mm, with 4 components from 4 distinct parts.
Other key parts include the Omnetics_A79026. By type, the board carries 2 ICs and 2 connectors.
It belongs with the iot & wireless designs in this gallery.
From the project
Kevin's analysis code
Main components on the EMG wireless interconnect
EMG wireless interconnect bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_1x50 | Samtec_xconn_point | U1 |
| 1 | Omnetics_A79026 | Omnetics_A79026 | U2 |
| 1 | Conn_02x25_Odd_Even | Samtec_edge | J1 |
| 1 | Conn_01x33 | Omnetics_xconn_point | J2 |
EMG wireless interconnect design files
The KiCad project lives in the limblab/proc-kevin repository on GitHub; these links point at the commit this page was built from.
EMG wireless interconnect: common questions
How big is the EMG wireless interconnect PCB?
The EMG wireless interconnect measures 32 × 48.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EMG wireless interconnect?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the EMG wireless interconnect design files?
From the limblab/proc-kevin repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the EMG wireless interconnect design in my own project?
The repository has no license, so all rights stay with limblab. Use it as a reference, and ask the author before reusing the design.
More boards in proc-kevin
Raspberry PiCage LEDbutton pi
2.2 × 0.7 mm32 parts2LNo license2
Raspberry PiCage multigadget pi
65.3 × 84.6 mm29 parts2LNo license2
Back power board
44.2 × 45.5 mm14 parts2LNo license2
MG touchpad
45.2 × 26.7 mm5 parts2LNo license2
Pancake Wireless EMG
55 × 30 mm3 parts2LNo license2
Similar boards
RPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k
L0 IMU MPU9250
Luos-io
20.3 × 15.2 mm7 parts2LMIT547
L0 USBA
20.3 × 15.3 mm19 parts2LMIT547
L0 Controller motor
20.3 × 15.3 mm11 parts2LMIT547
L0 Dynamixel
20.3 × 15.2 mm15 parts2LMIT547
L0 stepper driver
20.3 × 15.2 mm18 parts2LMIT547