Spyspy board
About the Spyspy board
Spyspy board is an open source PCB design by linuxboot, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 40.2 × 92.5 mm, with 12 components from 10 distinct parts.
Other key parts include the MCP1700x-330xxTT. By type, the board carries 5 resistors, 4 connectors, 1 IC, 1 jumper and 1 capacitor.
From the project
adaptersoldered`: KiCAD files for the soldered Flashkeeper chip adapter
adaptersoldered`: KiCAD files for the soldered Flashkeeper chip adapter
dummyboard`: Rigid PCB with multiple flash package footprints and connectors for testing and development
spispyboard: FPGA-SoM-based board to run spispy` during development
singlestencil`: Project containing all PCBs in a single file. Intended to export a single paste-layer Gerber so that all Flashkeeper boards can be made using different parts of a single solder paste stencil.
Main components on the Spyspy board
Spyspy board bill of materials (BOM)
12 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1700x-330xxTT | SOT-23 | U1 |
| 1 | SODIMM-200 | TE_DDR2-SODIMM-200_1565918-4 | J1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB4215-03-A | J2 |
| 1 | Header_2x4 | PinHeader_2x04_P2.54mm_Vertical | J3 |
| 1 | FFC | TE_2328702-8 | J4 |
| 1 | Jumper_2_Bridged | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | 0.1uF | C_0805_2012Metric | C1 |
| 1 | 1.5k | R_0805_2012Metric | R1 |
| 2 | 5.1k | R_0805_2012Metric | R2, R3 |
| 2 | 27 | R_0805_2012Metric | R4, R5 |
Spyspy board design files
The KiCad project lives in the linuxboot/flashkeeper repository on GitHub; these links point at the commit this page was built from.
Spyspy board: common questions
How big is the Spyspy board?
The Spyspy board measures 40.2 × 92.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Spyspy board?
12 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Spyspy board design files?
From the linuxboot/flashkeeper repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Spyspy board design in my own project?
Yes, under the terms of its GPL-3.0 license, which linuxboot chose for the repository.
More boards in flashkeeper
Prog tool
55 × 26.5 mm70 parts2LGPL-3.04
FPGAFpga panelized
70 × 71.1 mm37 parts6LGPL-3.04
FPGAFpga
10 × 35 mm37 parts6LGPL-3.04
FPGAFpga notab
7.2 × 3.3 mm36 parts6LGPL-3.04
Single stencil
40.2 × 92.5 mm20 parts2LGPL-3.04
Dummy
29.8 × 40.6 mm14 parts2LGPL-3.04
Adapter soldered
11.5 × 17.9 mm12 parts2LGPL-3.04