HardLabs

Fpga panelized

linuxboot·flashkeeper·hw/fpga/fpga_panelized.kicad_pcb

Fpga panelized PCB layout, top view — open source FPGA board by linuxboot

About the Fpga panelized PCB

Fpga panelized is an open source FPGA PCB design by linuxboot, published on GitHub under the GPL-3.0 license. It is a 6-layer board measuring 70 × 71.1 mm, with 37 components from 10 distinct parts.

Its main chip is the ICE40UP5K-UWG30ITR, from the FPGA family. Other key parts include the TPS7A2012PDQNR, AT25DF041B-UUN-T and RV-3028-C8. By type, the board carries 25 test points, 4 ICs, 4 capacitors, 3 resistors and 1 connector.

From the project

adaptersoldered`: KiCAD files for the soldered Flashkeeper chip adapter

adaptersoldered`: KiCAD files for the soldered Flashkeeper chip adapter

dummyboard`: Rigid PCB with multiple flash package footprints and connectors for testing and development

spispyboard: FPGA-SoM-based board to run spispy` during development

singlestencil`: Project containing all PCBs in a single file. Intended to export a single paste-layer Gerber so that all Flashkeeper boards can be made using different parts of a single solder paste stencil.

Main components on the Fpga panelized

ICE40UP5K-UWG30ITRTPS7A2012PDQNRAT25DF041B-UUN-TRV-3028-C8

Fpga panelized bill of materials (BOM)

37 components, 10 distinct parts.

QtyPartRefs
1
ICE40UP5K-UWG30ITR
U1
1
TPS7A2012PDQNR
U2
1
AT25DF041B-UUN-T
U3
1
RV-3028-C8
U4
1
Conn_02x09_Odd_Even
J1
25
~
TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +17
4
4.7 uF
C1, C2, C3, C4
1
10k
R1
1
100
R3
1
10k
RN1

Fpga panelized design files

The KiCad project lives in the linuxboot/flashkeeper repository on GitHub; these links point at the commit this page was built from.

Fpga panelized: common questions

What microcontroller does the Fpga panelized use?

The Fpga panelized is built around the ICE40UP5K-UWG30ITR, from the FPGA family.

How big is the Fpga panelized PCB?

The Fpga panelized measures 70 × 71.1 mm, has 6 copper layers and is 0.8 mm thick.

How many components are on the Fpga panelized?

37 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Fpga panelized design files?

From the linuxboot/flashkeeper repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Fpga panelized design in my own project?

Yes, under the terms of its GPL-3.0 license, which linuxboot chose for the repository.

Can I test firmware for the Fpga panelized without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.

More boards in flashkeeper

Similar boards