Sa818-v carrier
About the Sa818-v carrier PCB
Sa818-v carrier is an open source PCB design by livitup, published on GitHub under the MIT license. It is a 2-layer board measuring 120 × 40 mm, with 9 components from 8 distinct parts.
Other key parts include the SA818V. By type, the board carries 5 connectors, 2 capacitors, 1 IC and 1 resistor.
It belongs with the wearables, audio and displays & leds designs in this gallery.
From the project
Building a SSTV #badgelife badge for HRV at DEFCON 34
This directory contains all KiCad design files for the DEFCON SSTV Badge.
This project uses KiCad 8. Custom symbols and footprints are included in the repository.
All schematic sheets are complete and ERC clean: - Power, Audio, Display/Camera, MCU, Switches, Connectors (main badge) - SA818-V Carrier, SA818-U Carrier
- Carrier boards: Complete (VHF and UHF) - Main badge: Board outline complete (TV shape with ears and feet), component placement and routing in progress
Main components on the Sa818-v carrier
Sa818-v carrier bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SA818V | VHF_UHF_Module_generic | U9 |
| 1 | Conn_Coaxial | SMA_Amphenol_132289_EdgeMount | J13 |
| 1 | Power/Audio | PinHeader_1x08_P2.54mm_Vertical | J14 |
| 1 | Control/Data | PinHeader_1x08_P2.54mm_Vertical | J15 |
| 2 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J16, J17 |
| 1 | 100nF | C_0402_1005Metric | C54 |
| 1 | 10uF | C_0603_1608Metric | C55 |
| 1 | 0 | R_0402_1005Metric | R18 |
Sa818-v carrier design files
The KiCad project lives in the livitup/hrv-sstv-badge repository on GitHub; these links point at the commit this page was built from.
Sa818-v carrier: common questions
How big is the Sa818-v carrier PCB?
The Sa818-v carrier measures 120 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sa818-v carrier?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sa818-v carrier design files?
From the livitup/hrv-sstv-badge repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sa818-v carrier design in my own project?
Yes, under the terms of its MIT license, which livitup chose for the repository.
More boards in hrv-sstv-badge
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k