HardLabs

Magnetometer array 3

lleck·PercussiveInterface-3·percussiveInterface-3.2/magnetometer_array_3/magnetometer_array_3.kicad_pcb

Magnetometer array 3 PCB layout, top view — open source board by lleck
Simulate this board

About the Magnetometer array 3 PCB

Magnetometer array 3 is an open source PCB design by lleck, published on GitHub. It is a 4-layer board measuring 168 × 8 mm, with 72 components from 12 distinct parts.

Other key parts include the SN74LV1T34DBV and SM225-10E. By type, the board carries 24 ICs, 24 connectors and 24 capacitors.

From the project

some files emerging in the development of a digital percussive interface

Main components on the Magnetometer array 3

SN74LV1T34DBVSM225-10E

Magnetometer array 3 bill of materials (BOM)

72 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
SN74LV1T34DBV
SM225-10E
U1, U2
22
SM225-10E
U3, U4, U5, U6, U7, U8, U9, U10 +14
1
0022232041
Conn_01x02_Pin
J1
16
Conn_01x02_Pin
J2, J3, J4, J12, J13, J14, J15, J16 +8
4
SLW-104-01-G-S
Conn_01x02_Pin
J5, J6, J7, J8
2
SAMTEC-SLW-108-01-X-S
Conn_01x02_Pin
J9, J10
1
SCREW_TERMINAL_01X02
Conn_01x02_Pin
J11
1
C12530
0.1µF
C1
1
C52923
0.1µF
C2
2
22PF
0.1µF
C3, C4
3
C1525
0.1µF
C5, C6, C12
17
0.1µF
C7, C8, C9, C10, C11, C13, C14, C15 +9

Magnetometer array 3 design files

The KiCad project lives in the lleck/PercussiveInterface-3 repository on GitHub; these links point at the commit this page was built from.

Magnetometer array 3: common questions

How big is the Magnetometer array 3 PCB?

The Magnetometer array 3 measures 168 × 8 mm, has 4 copper layers and is 1.592 mm thick.

How many components are on the Magnetometer array 3?

72 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Magnetometer array 3 design files?

From the lleck/PercussiveInterface-3 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Magnetometer array 3 design in my own project?

The repository has no license, so all rights stay with lleck. Use it as a reference, and ask the author before reusing the design.

More boards in PercussiveInterface-3