HardLabs

PercussiveInterface-3.1

lleck·PercussiveInterface-3·4_Layer_Board/percussiveInterface-3.1.kicad_pcb

PercussiveInterface-3.1 PCB layout, top view — open source ESP32 board by lleck
Simulate this board

About the PercussiveInterface-3.1 PCB

PercussiveInterface-3.1 is an open source ESP32 PCB design by lleck, published on GitHub. It is a 4-layer board measuring 460 × 97.7 mm, with 105 components from 11 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the SN74LV1T34DBV, 74HCT4051, SS39ET and QRE1113GR. By type, the board carries 64 diodes, 37 ICs and 4 capacitors.

From the project

some files emerging in the development of a digital percussive interface

Main components on the PercussiveInterface-3.1

SN74LV1T34DBV74HCT4051SS39ETESP32-S3-WROOM-1-N16R8QRE1113GR

PercussiveInterface-3.1 bill of materials (BOM)

105 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SN74LV1T34DBV
Teensy4.1
U1
1
SN74LV1T34DBV
74HCT4051
U2
3
74HCT4051
U3, U4, U5
30
SS39ET
U6, U7, U8, U9, U10, U11, U12, U13 +22
1
ESP32-S3-WROOM-1-N16R8
SS39ET
U34
1
QRE1113GR
SS39ET
U35
1
APA102-2020
D1
63
APA102-2020
D2, D3, D4, D5, D6, D7, D8, D9 +55
1
C12530
0.1µF
C1
1
C52923
0.1µF
C2
2
22PF
0.1µF
C3, C4

PercussiveInterface-3.1 design files

The KiCad project lives in the lleck/PercussiveInterface-3 repository on GitHub; these links point at the commit this page was built from.

PercussiveInterface-3.1: common questions

What microcontroller does the PercussiveInterface-3.1 use?

The PercussiveInterface-3.1 is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.

How big is the PercussiveInterface-3.1 PCB?

The PercussiveInterface-3.1 measures 460 × 97.7 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the PercussiveInterface-3.1?

105 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PercussiveInterface-3.1 design files?

From the lleck/PercussiveInterface-3 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PercussiveInterface-3.1 design in my own project?

The repository has no license, so all rights stay with lleck. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PercussiveInterface-3.1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in PercussiveInterface-3

Similar boards