LimbusZero
LMWB·LimbusZero·Hardware/LimbusZero.kicad_pcb
About the LimbusZero PCB
LimbusZero is an open source STM32 PCB design by LMWB, published on GitHub under the MIT license. It is a 2-layer board measuring 58.4 × 21.6 mm, with 17 components from 12 distinct parts.
Its main chip is the STM32C031K6T6, from the STM32 family. Other key parts include the AMS1117-3.3 and M24C01-FMN. By type, the board carries 5 capacitors, 4 connectors, 3 ICs, 3 diodes and 2 resistors.
It belongs with the displays & leds designs in this gallery.
From the project
Custom Microcontroller Board based on STM32C0-Series

Main components on the LimbusZero
LimbusZero bill of materials (BOM)
17 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | M24C01-FMN | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | STM32C031K6T6 | LQFP-32_7x7mm_P0.8mm | U3 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Horizontal | J1 |
| 1 | USB_B_Micro | USB_Mini-B_Lumberg_2486_01_Horizontal | J2 |
| 2 | Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | J3, J4 |
| 2 | LED | LED_1206_3216Metric | D1, D2 |
| 1 | D | D_1206_3216Metric | D3 |
| 2 | 1u | C_1206_3216Metric | C1, C2 |
| 2 | 100n | C_1206_3216Metric | C3, C5 |
| 1 | 4.7u | C_1206_3216Metric | C4 |
| 2 | 220 | R_1206_3216Metric | R1, R2 |
LimbusZero design files
The KiCad project lives in the LMWB/LimbusZero repository on GitHub; these links point at the commit this page was built from.
- LayoutHardware/LimbusZero.kicad_pcb
- SchematicHardware/LimbusZero.kicad_sch
LimbusZero: common questions
What microcontroller does the LimbusZero use?
The LimbusZero is built around the STM32C031K6T6, from the STM32 family.
How big is the LimbusZero PCB?
The LimbusZero measures 58.4 × 21.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LimbusZero?
17 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the LimbusZero design files?
From the LMWB/LimbusZero repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LimbusZero design in my own project?
Yes, under the terms of its MIT license, which LMWB chose for the repository.
Can I test firmware for the LimbusZero without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k