Interposer

LokiMetaSmith·MR1·Interposer/Interposer.kicad_pcb

Interposer PCB layout, top view — open source board by LokiMetaSmith

About the Interposer PCB

Interposer is an open source PCB design by LokiMetaSmith, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 55 × 52 mm, with 27 components from 16 distinct parts.

Other key parts include the ADA4940-1ACPZ-RL, AD4011BCPZ-RL7 and LP5907MFX-1.8/NOPB. By type, the board carries 12 resistors, 8 capacitors, 3 ICs, 1 transistor, 1 connector and 1 diode.

From the project

The MR1 Nanopore Reader is an open-source, ultra-low-noise solid-state and biological nanopore sequencer flow cell, low-current transimpedance amplifier, and automated fluidic control system. It integrates high-precision parametric CAD models (build123d), ultra-low-leakage analog

The MR1 Nanopore Reader is an open-source, ultra-low-noise solid-state and biological nanopore sequencer flow cell, low-current transimpedance amplifier, and automated fluidic control system. It integrates high-precision parametric CAD models (build123d), ultra-low-leakage analog front-end electronics (KiCad), an automated dual-pump fluidic handler, and an ESP32-S3 high-speed continuous streaming firmware stack.

Main components on the Interposer

Interposer bill of materials (BOM)

27 components, 16 distinct parts.

QtyPartRefs
1
ADA4940-1ACPZ-RL
ADA4940-1xCP
U6
1
AD4011BCPZ-RL7
AD40xxBRMZ
U13
1
LP5907MFX-1.8/NOPB
LP5907MFX-1.8
U14
1
2N7002
Q3
1
Conn_01x14_MountingPin
J7
1
PogoPin_SpringHeader_6Pin_Array
J_POGO1
1
MBR0540L-TP
MBR0540
D82
1
100nF
C9
1
JMK107C6475KA-T
4.7u
C11
4
100nF
C31, C32, C33, C39
1
GRM21BR61H106KE43K
10u
C35
1
1nF
C41
2
100k
R14, R15
2
RC0402JR-0727RL
27
R27, R41
4
RC0402JR-0727RL
49.9
R28, R29, R30, R31
4
499 (0.1%)
R43, R44, R45, R46

Interposer design files

The KiCad project lives in the LokiMetaSmith/MR1 repository on GitHub; these links point at the commit this page was built from.

Interposer: common questions

How big is the Interposer PCB?

The Interposer measures 55 × 52 mm, has 2 copper layers and is 0.8 mm thick.

How many components are on the Interposer?

27 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Interposer design files?

From the LokiMetaSmith/MR1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Interposer design in my own project?

Yes, under the terms of its AGPL-3.0 license, which LokiMetaSmith chose for the repository.

More boards in MR1