SoundCube
lorenzalber·SoundCube·PCB/PowerSupply.kicad_sch
About the SoundCube PCB
SoundCube is an open source PCB design by lorenzalber, published on GitHub under the MIT license. It is a board, with 40 components from 33 distinct parts.
Other key parts include the AP2112K-3.3. By type, the board carries 23 connectors, 12 capacitors, 3 resistors, 1 IC and 1 inductor.
It belongs with the audio, power & battery and displays & leds designs in this gallery.
From the project
DIY battery-powered Class-D music box with USB-C charging and MP3 playback. Designed in KiCad.
A battery-powered DIY music box with a Class-D amplifier, USB-C charging, MP3 playback from a USB stick, an Aux input and a small OLED display. Schematic and PCB designed in KiCad.
- Class-D amplifier based on the TI TPA3118 for high efficiency on battery power - Single 21700 Li-ion cell (Samsung INR21700-50S, 5000 mAh) with BMS protection - USB-C charging via TI BQ25606 buck charger with power path, so the box can play while charging - MP3 playback from a FAT32 USB stick via an MP3 decoder module - Aux input (3.5 mm jack) that mechanically disconnects the MP3 source when a cable is plugged…
Main components on the SoundCube
SoundCube bill of materials (BOM)
40 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5_HandSoldering | U1 |
| 1 | V+ | PinHeader_1x01_P2.00mm_Vertical | J1 |
| 1 | V- | J2 | |
| 1 | U+ | J3 | |
| 1 | U- | J4 | |
| 1 | B+ | PinHeader_1x01_P2.00mm_Vertical | J5 |
| 1 | B- | J6 | |
| 1 | SU12_in | PinHeader_1x01_P2.00mm_Vertical | J7 |
| 2 | GND | J8, J10 | |
| 1 | SU12_out | J9 | |
| 1 | Digitalschalter | SolderWire-1sqmm_1x02_P5.4mm_D1.4mm_OD2.7mm | J23 |
| 1 | SU5V_E+ | PinHeader_1x01_P2.00mm_Vertical | J27 |
| 1 | SU5V_E- | PinHeader_1x01_P2.00mm_Vertical | J28 |
| 1 | SU5V_A+ | PinHeader_1x01_P2.00mm_Vertical | J29 |
| 1 | SU5V_A- | PinHeader_1x01_P2.00mm_Vertical | J30 |
| 1 | LED | J31 | |
| 1 | TP_GND | PinHeader_1x01_P2.00mm_Vertical | J32 |
| 1 | TP_3,3V | PinHeader_1x01_P2.00mm_Vertical | J33 |
| 1 | TP_VBAT | PinHeader_1x01_P2.00mm_Vertical | J34 |
| 1 | TP_12V | PinHeader_1x01_P2.00mm_Vertical | J35 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP_5V | PinHeader_1x01_P2.00mm_Vertical | J36 |
| 1 | Boost Schalter | J37 | |
| 1 | Battery | J38 | |
| 1 | 10uH | L1 | |
| 2 | 4,7uF | C1, C7 | |
| 1 | 47uF | C2 | |
| 3 | 100nF | C3, C5, C31 | |
| 1 | 220uF | C4 | |
| 3 | 10uF | C6, C28, C30 | |
| 1 | 470uF | C8 | |
| 1 | 100uF | C29 | |
| 1 | 4,7k | R10 | |
| 2 | 0 | R11, R12 |
SoundCube design files
The KiCad project lives in the lorenzalber/SoundCube repository on GitHub; these links point at the commit this page was built from.
- SchematicPCB/PowerSupply.kicad_sch
SoundCube: common questions
How many components are on the SoundCube?
40 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the SoundCube design files?
From the lorenzalber/SoundCube repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the SoundCube design in my own project?
Yes, under the terms of its MIT license, which lorenzalber chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k