Covg voltage sense

lucask07·covg_voltage_sense

Covg voltage sense PCB layout, top view — open source board by lucask07

About the Covg voltage sense PCB

Covg voltage sense is an open source PCB design by lucask07, published on GitHub under the GPL-3.0 license. It is a 6-layer board measuring 48 × 34 mm, with 91 components from 40 distinct parts.

Other key parts include the DAC101C081CIMK_NOPB, OPA188XXDBV, TCA9555DBR, MCP4017T-103E/LT and OPA1641. By type, the board carries 42 resistors, 28 capacitors, 12 ICs, 4 connectors, 3 test points and 1 inductor.

From the project

COVG (NIH R15) V1 voltage sensing board with low input capacitance and BNC connector. Intended for fabrication at JLCPCB

This board is physically small so it can be housed in an enclosure on a micromanipulator. The board input is a BNC connector which is compatible with glass microelectrode holders.

The input amplifier must have low capacitance to minimize the total filter from the capacitance and the microelectrode resistance. The first version has a fixed amplifier gain.

The Revb board** modifications were designed and implemented by undergraduate student Jordan Haag. The board incorporates programmable gain and uses a low-noise voltage reference, REF3440, as the reference input to the offset adjust DAC.…

Covg voltage sense, from the project README
From the project README

Main components on the Covg voltage sense

Covg voltage sense bill of materials (BOM)

91 components, 40 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DAC101C081CIMK_NOPB
IC1
2
OPA188XXDBV
OPA188xxDBV
U1, U3
1
TCA9555DBR
U2
1
MCP4017T-103E/LT
MCP4017T-103E_LT
Microchip Technology
U4
1
OPA1641
U5
1
24AA025UID
U6
1
ADA4000-2ARZ-R7
U7
2
TMUX6111PWR
U8, U10
1
LP2981A-33DBVT
U9
1
REF3440TIDBVR
U11
1
Conn_Coaxial
J1
1
DNI
J2
1
HDMI_A
J4
1
Conn_Coaxial
J5
1
10K
10k
RV1
2
RCT-0C
TE Connectivity AMP Connectors
TP1, TP2
1
DNI
TP9
1
Ferrite_Bead
FB1
3
DNI
C1, C13, C19
18
0.1U
0.1u
C2, C3, C4, C6, C7, C9, C10, C14 +10
Show 20 more
QtyPartRefs
1
4.7U
4.7u
C5
1
1n
C8
3
1u
C11, C23, C24
2
10P
10p
C12, C21
2
3k
R1, R16
2
30K
30k
R2, R15
3
10K
10k
R3, R27, R28
4
DNI
R4, R8, R32, R38
9
100K
100k
R5, R17, R19, R20, R21, R22, R23, R24 +1
2
50K
49.9k
R6, R10
2
4.99k
R9, R29
4
3.01K
3.01k
R11, R13, R26, R30
2
0
R12, R71
2
33
R14, R18
1
49.9
R31
2
226K
226k
R33, R39
2
348K
348k
R34, R40
2
470K
470k
R35, R41
2
604K
604k
R36, R42
1
1
R66

Covg voltage sense design files

The KiCad project lives in the lucask07/covg_voltage_sense repository on GitHub; these links point at the commit this page was built from.

Covg voltage sense: common questions

How big is the Covg voltage sense PCB?

The Covg voltage sense measures 48 × 34 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the Covg voltage sense?

91 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Covg voltage sense design files?

From the lucask07/covg_voltage_sense repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Covg voltage sense design in my own project?

Yes, under the terms of its GPL-3.0 license, which lucask07 chose for the repository.