6 open source boards using the OPA1641

Real designs built with the OPA1641, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the OPA1641

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the OPA1641 connects to, and the resistors, capacitors and other passives placed on it.

  • The - pin has a series resistor on 5 of 5 designs, most often 10 kΩ (then 1 kΩ).
  • Pin 6 has a series capacitor on 4 of 5 designs, most often 10 pF (then 100 nF).
  • Pin 6 has a series resistor on 4 of 5 designs, most often 20 kΩ (then 10 kΩ).
  • The V+ pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF).
NCpin 1, 5, 8Connected to: Not connected 100%
-pin 2Connected to: Signal 100%
  • Series resistor on 100% · 10 kΩ (3), 1 kΩ (2), 3.01 kΩ (1)
  • Series capacitor on 60% · 10 pF (1), 220 pF (1), 1 µF (1)
  • Resistor to GND on 40% · 680 Ω (1), 3.01 kΩ (1)
+pin 3Connected to: A connector 40%
  • Series resistor on 60% · 10 kΩ (2), 1 kΩ (1), 0 Ω (1)
V-pin 4Connected to: GND 40% · -15V 20% · a signal 40%
  • Capacitor to GND on 60% · 100 nF (3), 22 µF (1), 100 µF (1)
Pin 6Connected to: Signal 100%
  • Series capacitor on 80% · 10 pF (2), 100 nF (2), 10 µF (1)
  • Series resistor on 80% · 20 kΩ (2), 10 kΩ (1), 3.01 kΩ (1)
V+pin 7Connected to: VCC 60% · a signal 40%
  • Decoupling capacitor on 80% · 100 nF (6), 10 µF (1), 100 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Current dr amp by werediver, XPS:Channel by yu2924, Covg voltage sense by lucask07 and QRPTransceiver by richardhosking.

The OPA1641 in open source designs

The gallery holds 6 open source boards using the OPA1641 from 6 GitHub repositories; a typical one measures about 100 × 69.2 mm and carries around 81 components.

67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Current dr amp by werediver.

What boards using the OPA1641 are built for

OPA1641: common questions

Where can I find a OPA1641 reference design?

Each of the 6 boards on this page is a real design using the OPA1641. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the OPA1641 - pin?

The - pin has a series resistor on 5 of 5 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the OPA1641.

How is the OPA1641 pin 6 connected?

Pin 6 has a series capacitor on 4 of 5 designs, most often 10 pF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the OPA1641.

What decoupling capacitors do designs use on the OPA1641 V+ pin?

The V+ pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the OPA1641.

How big is a typical board using the OPA1641?

The median is 100 × 69.2 mm, and 67% are two-layer designs.

What is the most popular open source board using the OPA1641?

By GitHub stars, Current dr amp by werediver, with 7 stars.

Can I simulate one of these boards using the OPA1641 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part