Analog dithering

Luk9091·Analog_dithering·Schematic/current_measure.kicad_pcb

Analog dithering PCB layout, top view — open source STM32 board by Luk9091

About the Analog dithering PCB

Analog dithering is an open source STM32 PCB design by Luk9091, published on GitHub. It is a 4-layer board measuring 55 × 30 mm, with 58 components from 36 distinct parts.

Its main chip is the STM32G431C8Tx, from the STM32 family. Other key parts include the MIC5365-3.3YD5, INA186, ISO652, OPA333xxDBV and OPA350. By type, the board carries 23 capacitors, 14 resistors, 7 ICs, 5 connectors, 4 diodes and 1 transistor.

From the project

nA current meter for master class

Main components on the Analog dithering

Analog dithering bill of materials (BOM)

58 components, 36 distinct parts.

QtyPartRefs
1
MIC5365-3.3YD5
U1
1
INA186
U2
1
ISO652
U3
1
OPA333xxDBV
U4
1
OPA350
U5
1
STM32G431C8Tx
U6
1
OPA333xxDBV
U7
1
Si2319CDS
Q1
1
8MHz
Y1
1
Conn_01x04_Pin
J1
1
Conn_01x02
J2
1
Screw_Terminal_01x02
J3
1
Conn_02x03_Counter_Clockwise
J5
1
Conn_01x04
J6
2
2k
RV1, RV2
1
SW_Push
SW1
2
MBR1020VL
D1, D2
2
LED
D3, D4
1
0.1u
C1
2
4.7u
C2, C15
Show 16 more
QtyPartRefs
2
10u
C3, C21
3
1u
C4, C14, C22
10
100n
C5, C7, C10, C11, C12, C13, C17, C18 +2
1
22n
C6
2
0.1µ
C8, C16
1
4.7µ
C9
1
10n
C19
4
1k
R1, R3, R11, R12
2
100
R2, R9
1
19.1k
R4
1
100k
R5
1
10k
R6
1
10
R7
1
1.62M
R8
1
220
R10
2
4.7k
R13, R14

Analog dithering design files

The KiCad project lives in the Luk9091/Analog_dithering repository on GitHub; these links point at the commit this page was built from.

Analog dithering: common questions

What microcontroller does the Analog dithering use?

The Analog dithering is built around the STM32G431C8Tx, from the STM32 family.

How big is the Analog dithering PCB?

The Analog dithering measures 55 × 30 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Analog dithering?

58 components, from 36 distinct parts. The full bill of materials is listed on this page.

Where can I download the Analog dithering design files?

From the Luk9091/Analog_dithering repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Analog dithering design in my own project?

The repository has no license, so all rights stay with Luk9091. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Analog dithering without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards