Kamerovy system v1.7
About the Kamerovy system v1.7 PCB
Kamerovy system v1.7 is an open source PCB design by lukas-pastva, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 99.8 × 99.8 mm, with 30 components from 27 distinct parts.
By type, the board carries 16 connectors, 5 resistors, 1 transistor, 1 relay and 1 diode.
From the project
My Hardware projects
Kamerovy system v1.7 bill of materials (BOM)
30 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2N2219 | TSOT-23_HandSoldering | Q1 |
| 1 | d-dc | psw-dc-dc-lm2596 | J1 |
| 1 | eth1 | rj-45-big-pins | J3 |
| 1 | eth2 | psw-rj45-no-hole | J4 |
| 1 | eth8 | psw-rj45-no-hole | J5 |
| 1 | fan | Pin_Header_Straight_2x01_Pitch2.54mm | J6 |
| 1 | eth4 | psw-rj45-no-hole | J8 |
| 1 | eth5 | psw-rj45-no-hole | J9 |
| 1 | eth6 | psw-rj45-no-hole | J10 |
| 1 | eth7 | psw-rj45-no-hole | J11 |
| 1 | eth7-in | rj-45-big-pins | J12 |
| 1 | eth1-in | psw-rj45-no-hole | J13 |
| 1 | eth2-in | rj-45-big-pins | J14 |
| 1 | eth8-in | rj-45-big-pins | J15 |
| 1 | eth4-in | rj-45-big-pins | J16 |
| 1 | eth5-in | rj-45-big-pins | J17 |
| 1 | eth6-in | rj-45-big-pins | J18 |
| 1 | 12v-input | psw-konektor-zeleny | 12v1 |
| 1 | cam-out | psw-konektor-zeleny | 12v2 |
| 1 | switch-in | psw-konektor-zeleny | 12v3 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | G5Q-1 | psw-relay-small | K1 |
| 1 | fuse-1 | psw-poistka-auto | fuse-1 |
| 1 | fuse-2 | psw-poistka-auto | fuse-2 |
| 1 | gnd | psw-konektor-zeleny | gnd1 |
| 1 | D | R_1206 | D1 |
| 3 | R | R_1206 | R1, R8, R9 |
| 2 | R | R_1206_HandSoldering | R2, R14 |
Kamerovy system v1.7 design files
The KiCad project lives in the lukas-pastva/hobby-hw repository on GitHub; these links point at the commit this page was built from.
Kamerovy system v1.7: common questions
How big is the Kamerovy system v1.7 PCB?
The Kamerovy system v1.7 measures 99.8 × 99.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kamerovy system v1.7?
30 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kamerovy system v1.7 design files?
From the lukas-pastva/hobby-hw repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Kamerovy system v1.7 design in my own project?
Yes, under the terms of its Apache-2.0 license, which lukas-pastva chose for the repository.
More boards in hobby-hw
Modul5.7-modulable
99.8 × 24.7 mm153 parts2LApache-2.01
Power source big v1.3
7.4 × 7.4 mm48 parts2LApache-2.01
Smart switch-1.5
9.7 × 1.3 mm31 parts2LApache-2.01
AVR/ArduinoPsu smart v1.0
100 × 24.2 mm26 parts2LApache-2.01
Psu-25W-v1.1
99.8 × 99.8 mm18 parts2LApache-2.01
Fan v1.0
48 × 48 mm17 parts2LApache-2.01
Poe-5port
81.1 × 84.5 mm16 parts2LApache-2.01
Psu small-80W-v1.5-front
99.8 × 99.8 mm13 parts2LApache-2.01
Psu-15W-v1.0
100 × 76.1 mm12 parts2LApache-2.01
Psu-80W-v1.5
48.3 × 55.5 mm8 parts2LApache-2.01
Power source big v1.2-reg
100 × 86.3 mm3 parts2LApache-2.01
Earlier revisions in the repo: kamerovy-system-v1.5