Power source big v1.3
About the Power source big v1.3 PCB
Power source big v1.3 is an open source PCB design by lukas-pastva, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 7.4 × 7.4 mm, with 48 components from 26 distinct parts.
By type, the board carries 1 fuse and 1 resistor.
From the project
My Hardware projects
Power source big v1.3 bill of materials (BOM)
48 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 3V | psw-kontakt-smd-velky | 3V1, 3V2, 3V3 |
| 1 | 3V-measure | psw-kontakt-smd-maly | 3V-measure1 |
| 3 | 5V | psw-kontakt-smd-velky | 5V1, 5V2, 5V3 |
| 1 | 5V-measure | psw-kontakt-smd-maly | 5V-measure1 |
| 4 | 5V-meter | psw-kontakt-smd-maly | 5V-meter1, 5V-meter2, 5V-meter3, 5V-meter4 |
| 3 | 12V | psw-kontakt-smd-velky | 12V1, 12V2, 12V3 |
| 1 | 12V-measure | psw-kontakt-smd-maly | 12V-measure1 |
| 1 | -12V | psw-bananik | -12V1 |
| 1 | -12V | psw-kontakt-smd-velky | -12V2 |
| 1 | Fuse | R_1206_HandSoldering | F1 |
| 2 | GND-3V | psw-bananik | GND-3V1, GND-5V1 |
| 1 | GND-3V | psw-kontakt-smd-velky | GND-3V2 |
| 1 | GND-5V | psw-kontakt-smd-velky | GND-5V2 |
| 2 | GND-12V | psw-bananik | GND-12V1, GND-12V3 |
| 1 | GND-12V | psw-kontakt-smd-velky | GND-12V2 |
| 1 | GND-REG | psw-bananik | GND-REG1 |
| 1 | GND-REG | psw-kontakt-smd-velky | GND-REG2 |
| 3 | REG | psw-kontakt-smd-velky | REG1, REG2, REG3 |
| 1 | REG-measure | psw-kontakt-smd-maly | REG-measure1 |
| 7 | gnd | psw-kontakt-smd-velky | gnd1, gnd2, gnd3, gnd4, gnd5, gnd6, gnd7 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | gnd-meter | psw-kontakt-smd-maly | gnd-meter1, gnd-meter2, gnd-meter3, gnd-meter4 |
| 1 | panel-3V | psw-bananik | panel-3V1 |
| 1 | panel-5V | psw-bananik | panel-5V1 |
| 1 | panel-12V | psw-bananik | panel-12V1 |
| 1 | panel-REG | psw-bananik | panel-REG1 |
| 1 | R | R_0201 | R1 |
Power source big v1.3 design files
The KiCad project lives in the lukas-pastva/hobby-hw repository on GitHub; these links point at the commit this page was built from.
Power source big v1.3: common questions
How big is the Power source big v1.3 PCB?
The Power source big v1.3 measures 7.4 × 7.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power source big v1.3?
48 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Power source big v1.3 design files?
From the lukas-pastva/hobby-hw repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Power source big v1.3 design in my own project?
Yes, under the terms of its Apache-2.0 license, which lukas-pastva chose for the repository.
More boards in hobby-hw
Modul5.7-modulable
99.8 × 24.7 mm153 parts2LApache-2.01
Smart switch-1.5
9.7 × 1.3 mm31 parts2LApache-2.01
Kamerovy system v1.7
99.8 × 99.8 mm30 parts2LApache-2.01
AVR/ArduinoPsu smart v1.0
100 × 24.2 mm26 parts2LApache-2.01
Psu-25W-v1.1
99.8 × 99.8 mm18 parts2LApache-2.01
Fan v1.0
48 × 48 mm17 parts2LApache-2.01
Poe-5port
81.1 × 84.5 mm16 parts2LApache-2.01
Psu small-80W-v1.5-front
99.8 × 99.8 mm13 parts2LApache-2.01
Psu-15W-v1.0
100 × 76.1 mm12 parts2LApache-2.01
Psu-80W-v1.5
48.3 × 55.5 mm8 parts2LApache-2.01
Power source big v1.2-reg
100 × 86.3 mm3 parts2LApache-2.01