I2C-Hub

lukeandrachuk-coder·I2C-Hub·KiCad files/I2C Hub.kicad_pcb

I2C-Hub PCB layout, top view — open source board by lukeandrachuk-coder

About the I2C-Hub PCB

I2C-Hub is an open source PCB design by lukeandrachuk-coder, published on GitHub under the MIT license. It is a 2-layer board measuring 62.5 × 37.5 mm, with 19 components from 16 distinct parts.

Other key parts include the TCA9548APWR. By type, the board carries 12 connectors, 4 resistors, 1 IC, 1 diode and 1 capacitor.

From the project

A PCB that can take one I2C input and rout it to several I2C outputs so you can have many things connected/controlled to a microcontroller that only has one I2C port.

The purpose of this project is to make a board that expands the number of I2C connective devices that you can connect to a microcontroller. The board was designed in KiCAD a free PCB design software. How it works is you connect the VCC, GND, SCL, and SDA from your microcontroller to the same ports in the I2C_In pins on the I2C hub board. You can then connect one or more of the eight out pins to your I2C devices.

I2C-Hub, from the project README
From the project README

Main components on the I2C-Hub

I2C-Hub bill of materials (BOM)

19 components, 16 distinct parts.

QtyPartRefs
1
TCA9548APWR
U1
1
I2C_IN
J1
1
I2C_OUT_0
J2
1
I2C_OUT_1
J3
1
I2C_OUT_2
J4
1
I2C_OUT_3
J5
1
4
J6
1
I2C_OUT_5
J7
1
I2C_OUT_6
J8
1
I2C_OUT_7
J9
3
Conn_01x03_Pin
J10, J11, J12
1
LED
D1
1
0.1uF
C1
2
4.7k
R1, R2
1
10k
R3
1
1k
R4

I2C-Hub design files

The KiCad project lives in the lukeandrachuk-coder/I2C-Hub repository on GitHub; these links point at the commit this page was built from.

I2C-Hub: common questions

How big is the I2C-Hub PCB?

The I2C-Hub measures 62.5 × 37.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the I2C-Hub?

19 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the I2C-Hub design files?

From the lukeandrachuk-coder/I2C-Hub repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the I2C-Hub design in my own project?

Yes, under the terms of its MIT license, which lukeandrachuk-coder chose for the repository.