HardLabs

Arduino Mega

LUMERIIX·FrequencyCounter·kicad/kicad-library-master/template/Arduino_Mega_R3/Arduino_Mega.kicad_pcb

Arduino Mega PCB layout, top view — open source AVR/Arduino board by LUMERIIX
Simulate this board

About the Arduino Mega PCB

Arduino Mega is an open source AVR/Arduino PCB design by LUMERIIX, published on GitHub. It is a 2-layer board measuring 101.6 × 53.3 mm, with 13 components from 7 distinct parts.

Its main chip is the Arduino_1pin, from the AVR/Arduino family.

From the project

FPGA based frequnecy counter hard- and software repository

This repository contains the official schematic and 3D libraries supported by the KiCad library team.

The footprint libraries are the .pretty repos themselves and are used online by default. If you want to download them locally, the library-repos-install.bat and library-repos-install.sh scripts in the KiCad source can do this automatically.

Please, check the CONTRIBUTING.md file, or refer to the Wiki Page.

Arduino Mega bill of materials (BOM)

13 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Digital
P1
1
Power
P2
2
Analog
P3, P4
1
PWM
P5
1
PWM
P6
1
Communication
P7
6
CONN_01X01
P8, P9, P10, P11, P12, P13

Arduino Mega design files

The KiCad project lives in the LUMERIIX/FrequencyCounter repository on GitHub; these links point at the commit this page was built from.

Arduino Mega: common questions

What microcontroller does the Arduino Mega use?

The Arduino Mega is built around the Arduino_1pin, from the AVR/Arduino family.

How big is the Arduino Mega PCB?

The Arduino Mega measures 101.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arduino Mega?

13 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Arduino Mega design files?

From the LUMERIIX/FrequencyCounter repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Arduino Mega design in my own project?

The repository has no license, so all rights stay with LUMERIIX. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Arduino Mega without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in FrequencyCounter

Similar boards