Pico pwrmgr u031-01
lz129·pico-pwrmgr-u031-01·bt-rc-tx/bt-rc-tx.kicad_pcb
About the Pico pwrmgr u031-01 PCB
Pico pwrmgr u031-01 is an open source STM32 PCB design by lz129, published on GitHub. It is a 2-layer board measuring 80 × 60 mm, with 13 components from 12 distinct parts.
Its main chip is the STM32U031F8Px, from the STM32 family. Other key parts include the RaspberryPi_Pico_W. By type, the board carries 3 connectors, 2 switches, 2 diodes, 2 capacitors, 2 resistors and 1 IC.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
Bluetooth LE based Remote Control Transmitter
What is it? A replacement for broken remote controls used for garage doors and similar purposes. Original equipment is often expensive or completely unobtainium.
This document describes rev A. The design and the PCB have some issues which requires hardware patches on the PCB.
The major part is a Raspberry Pi Pico W which is responsible to handle the Bluetooth LE protocol. In order to handle the low power mode of the device an additional microcontroller is used.

Main components on the Pico pwrmgr u031-01
Pico pwrmgr u031-01 bill of materials (BOM)
13 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32U031F8Px | TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | RaspberryPi_Pico_W | RaspberryPi_Pico_W_SMD_HandSolder | A1 |
| 1 | Battery 3V | PinHeader_1x02_P2.54mm_Horizontal | J1 |
| 1 | SW Debug | PinHeader_1x05_P2.54mm_Horizontal | J3 |
| 1 | Inhibit Shutdown | PinHeader_1x02_P2.54mm_Horizontal | J4 |
| 1 | BUTTON1 | SW_PUSH_6mm | SW2 |
| 1 | BUTTON2 | SW_PUSH_6mm | SW3 |
| 1 | LED1 | LED_D5.0mm | D3 |
| 1 | LED2 | LED_D5.0mm | D4 |
| 1 | 47u | C_1206_3216Metric | C1 |
| 1 | 100n | C_0805_2012Metric | C2 |
| 2 | 2k2 | R_0805_2012Metric | R4, R5 |
Pico pwrmgr u031-01 design files
The KiCad project lives in the lz129/pico-pwrmgr-u031-01 repository on GitHub; these links point at the commit this page was built from.
- Layoutbt-rc-tx/bt-rc-tx.kicad_pcb
- Schematicbt-rc-tx/bt-rc-tx.kicad_sch
Pico pwrmgr u031-01: common questions
What microcontroller does the Pico pwrmgr u031-01 use?
The Pico pwrmgr u031-01 is built around the STM32U031F8Px, from the STM32 family.
How big is the Pico pwrmgr u031-01 PCB?
The Pico pwrmgr u031-01 measures 80 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pico pwrmgr u031-01?
13 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pico pwrmgr u031-01 design files?
From the lz129/pico-pwrmgr-u031-01 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pico pwrmgr u031-01 design in my own project?
The repository has no license, so all rights stay with lz129. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pico pwrmgr u031-01 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k