72 open source boards using the RaspberryPi_Pico_W

Real designs built with the RaspberryPi_Pico_W, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

72 boardsClear filters|Most starred

How designs wire the RaspberryPi_Pico_W

Read from the KiCad layouts of 63 open source designs, one per repository: what each pin of the RaspberryPi_Pico_W connects to, and the resistors, capacitors and other passives placed on it.

  • The 3V3_EN pin is left unconnected on 61 of 63 designs.
  • The RUN pin is left unconnected on 59 of 63 designs (a signal on 3).
  • The ADC_VREF pin is left unconnected on 57 of 62 designs (3.3V on 4).
  • The GPIO28_ADC2 pin is left unconnected on 49 of 62 designs (a signal on 13).
GNDpin 3, 8, 13, 18, 23, 28, 38, D2Connected to: GND 86%
RUNpin 30Connected to: Not connected 94%
GPIO27_ADC1pin 32Connected to: Not connected 65% · a signal 35%
AGNDpin 33Connected to: Not connected 61% · GND 39%
GPIO28_ADC2pin 34Connected to: Not connected 79% · a signal 21%
ADC_VREFpin 35Connected to: Not connected 92%
3V3pin 36Connected to: 3.3V 62% · not connected 30%
3V3_ENpin 37Connected to: Not connected 97%
VBUSpin 40Connected to: Not connected 65% · 5V 21%
SWCLKpin D1Connected to: Not connected 92%
SWDIOpin D3Connected to: Not connected 92%

25 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Phased by Neumi, Left by Hex-4, EmuToLife by FromDarkHell and Expansion connector board by MEGA65.

The RaspberryPi_Pico_W in open source designs

The gallery holds 72 open source boards using the RaspberryPi_Pico_W from 67 GitHub repositories; a typical one measures about 98.6 × 81.3 mm and carries around 31 components.

93% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is Phased by Neumi.

Microcontrollers on boards using the RaspberryPi_Pico_W

RaspberryPi_Pico_W: common questions

Where can I find a RaspberryPi_Pico_W reference design?

Each of the 72 boards on this page is a real design using the RaspberryPi_Pico_W. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the RaspberryPi_Pico_W 3V3_EN pin connected?

The 3V3_EN pin is left unconnected on 61 of 63 designs. Counted from the KiCad layouts of 63 open source designs using the RaspberryPi_Pico_W.

How is the RaspberryPi_Pico_W RUN pin connected?

The RUN pin is left unconnected on 59 of 63 designs (a signal on 3). Counted from the KiCad layouts of 63 open source designs using the RaspberryPi_Pico_W.

How is the RaspberryPi_Pico_W ADC_VREF pin connected?

The ADC_VREF pin is left unconnected on 57 of 62 designs (3.3V on 4). Counted from the KiCad layouts of 63 open source designs using the RaspberryPi_Pico_W.

What parts are used alongside the RaspberryPi_Pico_W?

The AMS1117-3.3, A1308xLHxx-1, AP2112K-3.3, COM-09032 and LM339 appear in the most repositories here.

Which microcontrollers do boards using the RaspberryPi_Pico_W use?

Most are built on Raspberry Pi (67), RP2040/RP2350 (4) and STM32 (1).

How big is a typical board using the RaspberryPi_Pico_W?

The median is 98.6 × 81.3 mm, and 93% are two-layer designs.

What is the most popular open source board using the RaspberryPi_Pico_W?

By GitHub stars, Phased by Neumi, with 507 stars.

Can I simulate one of these boards using the RaspberryPi_Pico_W before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part