HardLabs

8view

magik6k·breadv·pcbs/8view/8view.kicad_pcb

8view PCB layout, top view — open source AVR/Arduino board by magik6k

About the 8view PCB

8view is an open source AVR/Arduino PCB design by magik6k, published on GitHub under the Custom license license. It is a 4-layer board measuring 25.9 × 35.6 mm, with 43 components from 10 distinct parts.

Its main chip is the ATtiny828-A, from the AVR/Arduino family. Other key parts include the HDSP-A151. By type, the board carries 26 resistors, 8 diodes, 4 connectors, 3 ICs and 2 capacitors.

From the project

Code bits of the TTL breadbord RISC-V

8view, from the project README
From the project README

Main components on the 8view

ATtiny828-AHDSP-A151

8view bill of materials (BOM)

43 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATtiny828-A
U1
2
HDSP-A151
U2, U3
1
Conn_01x10_Female
J1
1
Conn_01x10_Female
J2
2
Conn_01x06_Female
J3, J4
4
GREEN
D1, D2, D3, D4
4
RED
D5, D6, D7, D8
2
1p
C1, C2
10
1k5
R1, R2, R3, R4, R5, R6, R7, R8 +2
16
1k
R11, R12, R13, R14, R15, R16, R17, R18 +8

8view design files

The KiCad project lives in the magik6k/breadv repository on GitHub; these links point at the commit this page was built from.

8view: common questions

What microcontroller does the 8view use?

The 8view is built around the ATtiny828-A, from the AVR/Arduino family.

How big is the 8view PCB?

The 8view measures 25.9 × 35.6 mm, has 4 copper layers and is 4.69 mm thick.

How many components are on the 8view?

43 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 8view design files?

From the magik6k/breadv repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 8view design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the 8view without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in breadv

Similar boards