PT4115 MiniBoard
maltejahn·PT4115_MiniBoard
About the PT4115 MiniBoard PCB
PT4115 MiniBoard is an open source PCB design by maltejahn, published on GitHub. It is a 2-layer board measuring 27 × 16.3 mm, with 13 components from 8 distinct parts.
Other key parts include the PT4115. By type, the board carries 5 connectors, 3 resistors, 2 diodes, 1 IC, 1 inductor and 1 capacitor.
From the project
Single LED Driver up to 1.2A
Aim: - small board with a PT4115 LED constant current source -> up to 1.2 A - dimmable with a 5V PWM signal (PWM frequency up to 50 kHz acc. to datasheet) - single sided so it can be mounted to a heat sink (using 2 M4 Bolts) - connected using pin header (0.1") of soldered directly - shouldnt smoke immediately
Tasks: - finalize schematic - done - finalize pcb - done - Gerbers, order pcb - tbd - BOM, assemble instructions - tbd - assemble - tbd - test - tbd - report - tbd

Main components on the PT4115 MiniBoard
PT4115 MiniBoard bill of materials (BOM)
13 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PT4115 | SOT-89-5_Handsoldering | U1 |
| 5 | TestPoint | Solder_Pad_5x1.3mm | J2, J3, J4, J5, J6 |
| 1 | BZX384-B5V1,115 | D_SC-80_HandSoldering | D1 |
| 1 | SS14-LTP | D_SMA_Handsoldering | D2 |
| 1 | SRN6045TA-470M | L_Bourns_SRN6045TA | L1 |
| 1 | nc | C_0805_2012Metric | C1 |
| 2 | 0R2 | R_1210_3225Metric | R1, R2 |
| 1 | 10K 10k | R_0805_2012Metric | R3 |
PT4115 MiniBoard design files
The KiCad project lives in the maltejahn/PT4115_MiniBoard repository on GitHub; these links point at the commit this page was built from.
PT4115 MiniBoard: common questions
How big is the PT4115 MiniBoard PCB?
The PT4115 MiniBoard measures 27 × 16.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PT4115 MiniBoard?
13 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PT4115 MiniBoard design files?
From the maltejahn/PT4115_MiniBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PT4115 MiniBoard design in my own project?
The repository has no license, so all rights stay with maltejahn. Use it as a reference, and ask the author before reusing the design.