2425 ESE Projet Torero
Manassehalt·2425_ESE_Projet_Torero·PCB/Projet_torero/Projet_torero.kicad_pcb
About the 2425 ESE Projet Torero PCB
2425 ESE Projet Torero is an open source STM32 PCB design by Manassehalt, published on GitHub. It is a 4-layer board measuring 54 × 57 mm, with 58 components from 29 distinct parts.
Its main chip is the STM32G431CBUx, from the STM32 family. By type, the board carries 25 capacitors, 24 resistors, 3 diodes, 2 inductors, 1 IC and 1 crystal.
From the project
Ce projet utilise KiCad pour la conception des schémas et des PCB. L'architecture électronique est organisée de manière hiérarchique pour une gestion claire.
Ce projet utilise KiCad pour la conception des schémas et des PCB. L'architecture électronique est organisée de manière hiérarchique pour une gestion claire.
- Page principale (Racine) : Vue d'ensemble de l'architecture. - STM32 (Page 2) : Microcontrôleur central et ses connexions. - Puissance (Page 3) : Alimentation et distribution des tensions. - Contrôle des moteurs gauche et droit. - Capteurs (Page 4) : Intégration des capteurs, tels que le Lidar, l'accéléromètre, et les détecteurs de bord. - Alimentation (Page 5) : Régulateurs pour les tensions de 3,3 V et 5 V.
Main components on the 2425 ESE Projet Torero
2425 ESE Projet Torero bill of materials (BOM)
58 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G431CBUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U201 |
| 1 | Crystal_GND24_Small | Crystal_SMD_EuroQuartz_MT-4Pin_3.2x2.5mm | Y201 |
| 1 | 10k | R_0603_1608Metric | 10k201 |
| 1 | SW_Push | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW201 |
| 2 | Red | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D202 |
| 1 | Green | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D201 |
| 1 | L | L_0603_1608Metric | L202 |
| 1 | 4u7 | L_Wuerth_WE-TPC-3816 | L501 |
| 2 | 20p | C_0402_1005Metric | C201, C202 |
| 8 | 100n | C_0402_1005Metric | C203, C204, C206, C207, C208, C402, C502, C503 |
| 9 | 1u | C_0603_1608Metric | C205, C210, C401, C505, C506, C601, C603, C701 +1 |
| 1 | 4n7 | C_0603_1608Metric | C209 |
| 1 | 10n | C_0402_1005Metric | C211 |
| 1 | 22u | C_0805_2012Metric | C501 |
| 1 | 47u | C_0603_1608Metric | C504 |
| 2 | 10u | C_0603_1608Metric | C602, C702 |
| 1 | 10 | R_0402_1005Metric | R201 |
| 1 | 120 | R_0603_1608Metric | R202 |
| 2 | 140 | R_0603_1608Metric | R203, R314 |
| 8 | 1k | R_0603_1608Metric | R204, R205, R206, R207, R208, R209, R210, R211 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100k | R_0603_1608Metric | R501, R502 |
| 1 | 20 | R_0603_1608Metric | R503 |
| 1 | 16k | R_0603_1608Metric | R504 |
| 1 | 40k2 | R_0603_1608Metric | R505 |
| 1 | 7k68 | R_0603_1608Metric | R506 |
| 2 | 300 | R_0603_1608Metric | R801, R901 |
| 2 | 15k3 | R_0603_1608Metric | R802, R902 |
| 1 | BU33SD5WG-TR | SOT95P280X125-5N | Régu3.3V |
| 1 | MP1475SGJ-P | SOT65P280X100-8N | Régu5V |
2425 ESE Projet Torero design files
The KiCad project lives in the Manassehalt/2425_ESE_Projet_Torero repository on GitHub; these links point at the commit this page was built from.
2425 ESE Projet Torero: common questions
What microcontroller does the 2425 ESE Projet Torero use?
The 2425 ESE Projet Torero is built around the STM32G431CBUx, from the STM32 family.
How big is the 2425 ESE Projet Torero PCB?
The 2425 ESE Projet Torero measures 54 × 57 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the 2425 ESE Projet Torero?
58 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 2425 ESE Projet Torero design files?
From the Manassehalt/2425_ESE_Projet_Torero repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 2425 ESE Projet Torero design in my own project?
The repository has no license, so all rights stay with Manassehalt. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 2425 ESE Projet Torero without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k