Pi compute device
About the Pi compute device PCB
Pi compute device is an open source PCB design by marcbperez, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 95.3 × 69.9 mm, with 66 components from 28 distinct parts.
Other key parts include the AP7115-25SEG, PAM2306AYPKE, AP2331W and ESD5384. By type, the board carries 24 resistors, 20 capacitors, 9 connectors, 4 ICs, 4 transistors and 2 diodes.
From the project
A portable device built with the Raspberry Pi Compute module.
A portable device built with the Raspberry Pi Compute module.
The schematics project is done in KiCad, free and available to most common platforms. More information on how to download and install KiCad can be found in its [official download page][download-kicad].
Clone the sources and browse the package folder. The KiCad project is located in kicad-project/pi-compute-device.pro.
Main components on the Pi compute device
Pi compute device bill of materials (BOM)
66 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP7115-25SEG | AP7115-25SEG | U1 |
| 1 | PAM2306AYPKE | PAM2306AYPKE | U2 |
| 1 | AP2331W | AP2331W | U3 |
| 1 | ESD5384 | ESD5384 | U4 |
| 4 | DMG1012T | DMG1012T | Q1, Q2, Q3, Q4 |
| 1 | Micro_SD_Card | 2908-05WB-MG | CON1 |
| 1 | 47151-1051 | 10029449-111RLF | J1 |
| 1 | CONN_01X02 | Pin_Header_Straight_1x02_Pitch2.00mm | P1 |
| 1 | CONN_02X03 | Pin_Header_Straight_2x03_Pitch2.00mm | P2 |
| 1 | CONN_01X03 | Pin_Header_Straight_1x03_Pitch2.00mm | P3 |
| 1 | USB_OTG | 10103594-0001LF | P4 |
| 1 | DDR2_SODIMM_CM3 | 1473005 | P5 |
| 2 | CONN_02X30 | Pin_Header_Straight_2x30_Pitch2.00mm | P6, P7 |
| 1 | MF-MSMF200 | MF-MSMF200 | F1 |
| 2 | LED | LED_0402 | D1, D2 |
| 2 | 4.7u | Inductor_Taiyo-Yuden_MD-2020 | L1, L2 |
| 4 | 47u | C_0201 | C1, C2, C8, C13 |
| 2 | NF | C_0201 | C3, C12 |
| 3 | 4.7u | C_0201 | C4, C7, C17 |
| 3 | 1u | C_0201 | C5, C16, C18 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 100n | C_0201 | C6, C9, C19, C20 |
| 4 | 10u | C_0201 | C10, C11, C14, C15 |
| 9 | 0R | R_0201 | R1, R2, R3, R5, R7, R8, R9, R15 +1 |
| 2 | 470R | R_0201 | R4, R14 |
| 7 | 100K | R_0201 | R6, R12, R13, R18, R21, R22, R23 |
| 3 | NF | R_0201 | R10, R11, R20 |
| 2 | 47K | R_0201 | R16, R17 |
| 1 | 1K | R_0201 | R24 |
Pi compute device design files
The KiCad project lives in the marcbperez/pi-compute-device repository on GitHub; these links point at the commit this page was built from.
Pi compute device: common questions
How big is the Pi compute device PCB?
The Pi compute device measures 95.3 × 69.9 mm, has 2 copper layers and is 1.6002 mm thick.
How many components are on the Pi compute device?
66 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pi compute device design files?
From the marcbperez/pi-compute-device repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pi compute device design in my own project?
Yes, under the terms of its Apache-2.0 license, which marcbperez chose for the repository.