Ecu emulator
About the Ecu emulator PCB
Ecu emulator is an open source PCB design by marcutudor79, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 57.5 × 62.5 mm, with 14 components from 12 distinct parts.
Other key parts include the SN65HVD230. By type, the board carries 3 connectors, 2 resistors, 1 IC and 1 diode.
From the project
My Bachelor's degree that consists of the electronic module for the Formula Student race car and it's testing module
The CAN packets are formatted with respect to the CAN Packet allocation excel and then sent via the CAN bus.
Main components on the Ecu emulator
Ecu emulator bill of materials (BOM)
14 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | F31L-1A7H1-11030 Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | DM3CS-SF Conn_01x20_Pin | PinHeader_1x20_P2.54mm_Vertical | J2 |
| 1 | DT15-12PA Conn_01x20_Pin | PinHeader_1x20_P2.54mm_Vertical | J3 |
| 1 | COOLANT_TEMP | Potentiometer_Alps_RK163_Single_Horizontal | COOLANT_TEMP1 |
| 3 | SW_Push | SW_PUSH_6mm | GEAR_SHIFT1, LOW_BATT1, LOW_OIL1 |
| 1 | Conn_01x07_Socket | PinHeader_1x07_P2.54mm_Vertical | MCP2515_HEADER1 |
| 1 | OIL_TEMP | Potentiometer_Alps_RK163_Single_Horizontal | OIL_TEMP1 |
| 1 | RPM | Potentiometer_Alps_RK163_Single_Horizontal | RPM1 |
| 1 | BZX84C18 LED_GREEN | D_1210_3225Metric | D1 |
| 1 | 249 150 | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R1 |
| 1 | 2K2 120 | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R2 |
Ecu emulator design files
The KiCad project lives in the marcutudor79/electronic-module-for-the-dashboard-of-upbdrive-racing-car repository on GitHub; these links point at the commit this page was built from.
Ecu emulator: common questions
How big is the Ecu emulator PCB?
The Ecu emulator measures 57.5 × 62.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ecu emulator?
14 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ecu emulator design files?
From the marcutudor79/electronic-module-for-the-dashboard-of-upbdrive-racing-car repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ecu emulator design in my own project?
Yes, under the terms of its Apache-2.0 license, which marcutudor79 chose for the repository.
