AlphaMod32
marksard·alphamod32·pcb/rev1/AlphaMod32.kicad_pcb
About the AlphaMod32 PCB
AlphaMod32 is an open source STM32 PCB design by marksard, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 214.3 × 77.7 mm, with 79 components from 12 distinct parts.
Its main chip is the STM32F072C8Tx, from the STM32 family. Other key parts include the TLV73333PDBV. By type, the board carries 32 switches, 32 diodes, 6 capacitors, 4 resistors, 2 ICs and 1 connector.
It belongs with the keyboards designs in this gallery.
From the project
The ALPHAMOD32 is a 32 key compact keyboard project.
The ALPHAMOD32 is a 32 key compact keyboard project.
QMK Firmware https://github.com/marksard/qmkfirmware/tree/ownbuild/keyboards/marksard/alphamod32
Main components on the AlphaMod32
AlphaMod32 bill of materials (BOM)
79 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F072C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | TLV73333PDBV | SOT-23-5 | U2 |
| 1 | USB_C_Receptacle_USB2.0 | HRO-TYPE-C-31-M-12-Assembly | J1 |
| 1 | PRTR5V0U2X | SOT-143 | ESD1 |
| 1 | 500mA | Fuse_0805_2012Metric | F1 |
| 32 | CPG151101S11-16 | MX-Hotswap-1U_F | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +24 |
| 32 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +24 |
| 1 | 10uF | C_0603_1608Metric | C1 |
| 1 | 1uF | C_0402_1005Metric | C2 |
| 4 | 100nF | C_0402_1005Metric | C3, C4, C5, C6 |
| 2 | 5.1k | R_0603_1608Metric | R1, R2 |
| 2 | 5.1k | R_0402_1005Metric | R3, R4 |
AlphaMod32 design files
The KiCad project lives in the marksard/alphamod32 repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/rev1/AlphaMod32.kicad_pcb
- Schematicpcb/rev1/AlphaMod32.kicad_sch
AlphaMod32: common questions
What microcontroller does the AlphaMod32 use?
The AlphaMod32 is built around the STM32F072C8Tx, from the STM32 family.
How big is the AlphaMod32 PCB?
The AlphaMod32 measures 214.3 × 77.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AlphaMod32?
79 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the AlphaMod32 design files?
From the marksard/alphamod32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the AlphaMod32 design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which marksard chose for the repository.
Can I test firmware for the AlphaMod32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k