40 open source boards using the TLV73333PDBV
Real designs built with the TLV73333PDBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Hid remapper
jfedor2
100 × 100 mm124 parts2LMIT1.7kFPGA
First fpga
mattvenn
100 × 68 mm60 parts2LNo license83FPGA
Spla
khaydarian
165 × 107 mm252 parts4LNo license32ESP32
Combadge
Pippadi
33.7 × 31 mm34 parts2LGPL-3.020RP2040/RP2350
ErgoSHIFT-rgb
mizma
233.2 × 147.7 mm81 parts2LCC-BY-SA-4.019RP2040/RP2350
Riotee Board
NessieCircuits
55.9 × 22.9 mm80 parts4LCERN-OHL-W-2.015RP2040/RP2350
Tri-Hard slab v2
Rev1s10n
270 × 150 mm100 parts2LNo license10RP2040/RP2350
Rp2040-rs232
jfedor2
32 × 52 mm43 parts2LNo license9RP2040/RP2350
Riotee ProbeHardware
NessieCircuits
43.2 × 22.9 mm69 parts4LCERN-OHL-W-2.07FPGA
Ice40-breakout
null-a
56 × 71.8 mm55 parts2LNo license4RP2040/RP2350
Tri-Hard-Slab-Arcade-Edition
Rev1s10n
264 × 163 mm141 parts2LNo license3FPGA
X68k combocard
sayjionix
141 × 150 mm60 parts2LMIT3STM32
VORTAC Backup
FoCTow
46 × 52.4 mm125 parts4LNo license2RP2040/RP2350
Nanosplit
cveldy
300 × 120 mm46 parts2LCC-BY-SA-4.02RP2040/RP2350
PXN-X9-GP2040-CE
InfraredAces
77 × 72 mm45 parts2LNo license2AVR/Arduino
Titan67j60
Lehman3065
191 × 123 mm242 parts2LNo license0RP2040/RP2350
SlimDash rev1
mizma
157.1 × 131.5 mm137 parts2LCC-BY-SA-4.00RP2040/RP2350
Orbit remapper
techmech-keeb
100 × 100 mm124 parts2LMIT0RP2040/RP2350
Hid remapper personalized
cmsgraham
100 × 100 mm124 parts2LMIT0RP2040/RP2350
Project A
zephris
272.6 × 171 mm112 parts4LGPL-2.00Solar smart station
truongduynhan
57.8 × 39.5 mm81 parts4LMIT0STM32
AlphaMod32
marksard
214.3 × 77.7 mm79 parts2LCERN-OHL-S-2.00RP2040/RP2350
Myrp60
zlice
285 × 95.8 mm53 parts2LGPL-2.00STM32
Force feedback vr glove
yoonytunes
72.1 × 81.7 mm53 parts2LNo license0ESP32
Trackball
mornepousse
52 × 72.1 mm51 parts2LNo license0Nordic nRF
LactateStat v1
emilekelund
34.1 × 26.5 mm41 partsNo license0FPGA
X68000-midi
fabPlane
141 × 150 mm41 parts2LCC0-1.00RP2040/RP2350
Fireball mouse
zlice
71.7 × 49.8 mm33 parts2LGPL-2.00AVR/Arduino
Rf room sensor hw
dselcan
50.8 × 44 mm32 parts2LBSD-3-Clause0RP2040/RP2350
ErgoSHIFT-rev2
mizma
233.2 × 147.7 mm51 parts2LCC-BY-SA-4.019STM32
VORTAC trihole
FoCTow
46 × 52.4 mm108 parts4LNo license2Led board
InfraredAces
151 × 100 mm35 parts2LNo license2ESP32
Systemboard
adrianhelfer
175 × 135 mm193 parts4LNo license0RP2040/RP2350
SlimDash rev1-kicad rounded
mizma
157.1 × 131.5 mm137 parts2LCC-BY-SA-4.00ESP32
MaSe
mornepousse
63.8 × 97.6 mm36 parts2LNo license0STM32
Vortac Panel
FoCTow
80 × 80.6 mm82 parts4LNo license2
How designs wire the TLV73333PDBV
Read from the KiCad layouts of 32 open source designs, one per repository: what each pin of the TLV73333PDBV connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin is tied to 5V on 25 of 32 designs (GND on 2, a signal on 5).
- The OUT pin is tied to 3.3V on 25 of 30 designs (a signal on 5).
- The EN pin is tied to 5V on 24 of 32 designs (a signal on 8).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 5V 78% · a signal 16% | — |
| GNDpin 2 | Connected to: GND 91% | — |
| ENpin 3 | Connected to: 5V 75% · a signal 25% | — |
| NCpin 4 | Connected to: Not connected 97% | — |
| OUTpin 5 | Connected to: 3.3V 83% · a signal 17% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hid remapper by jfedor2, First fpga pcb by mattvenn, Spla by khaydarian and Combadge by Pippadi.
The TLV73333PDBV in open source designs
The gallery holds 40 open source boards using the TLV73333PDBV from 32 GitHub repositories; a typical one measures about 90 × 81.1 mm and carries around 66 components.
69% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Hid remapper by jfedor2.
Parts used alongside the TLV73333PDBV
Microcontrollers on boards using the TLV73333PDBV
What boards using the TLV73333PDBV are built for
TLV73333PDBV: common questions
Where can I find a TLV73333PDBV reference design?
Each of the 40 boards on this page is a real design using the TLV73333PDBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV73333PDBV IN pin connected?
The IN pin is tied to 5V on 25 of 32 designs (GND on 2, a signal on 5). Counted from the KiCad layouts of 32 open source designs using the TLV73333PDBV.
How is the TLV73333PDBV OUT pin connected?
The OUT pin is tied to 3.3V on 25 of 30 designs (a signal on 5). Counted from the KiCad layouts of 32 open source designs using the TLV73333PDBV.
How is the TLV73333PDBV EN pin connected?
The EN pin is tied to 5V on 24 of 32 designs (a signal on 8). Counted from the KiCad layouts of 32 open source designs using the TLV73333PDBV.
What parts are used alongside the TLV73333PDBV?
The RP2040, W25Q128JVS, W25Q16JVUXIQ, TLV73312PDBV and EL3H7-G appear in the most repositories here.
Which microcontrollers do boards using the TLV73333PDBV use?
Most are built on RP2040/RP2350 (18), STM32 (6), FPGA (5) and ESP32 (4).
How big is a typical board using the TLV73333PDBV?
The median is 90 × 81.1 mm, and 69% are two-layer designs.
What is the most popular open source board using the TLV73333PDBV?
By GitHub stars, Hid remapper by jfedor2, with 1,705 stars.
Can I simulate one of these boards using the TLV73333PDBV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.