Starfield-WX

marvyluvu·Starfield-WX·hardware/starfield.kicad_pcb

Starfield-WX PCB layout, top view — open source board by marvyluvu

About the Starfield-WX PCB

Starfield-WX is an open source PCB design by marvyluvu, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 10 components from 10 distinct parts.

By type, the board carries 6 connectors and 2 resistors.

It belongs with the displays & leds and sensors designs in this gallery.

From the project

Portable weather station made for camping and stargazing enthusiasts made for us along with ORBITZ

The brains of the operation is the arduino uno. It: - Reads temperature and humidity from a DHT11 module. - Calculates an approximate dew point from those readings. - Classifies dew risk (LOW, MEDIUM, HIGH) based on the spread between temperature and dew point. - Shows live values on a 16×2 character LCD while auto‑cycling between temperature, humidity, and dew‑point screens. - Uses a WS2812B LED halo as a status ring: green for low risk, orange for medium, red when dew is imminent.

Starfield-WX, from the project README
From the project README

Starfield-WX bill of materials (BOM)

10 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Power
J1
1
Digital/PWM
J2
1
Analog
J3
1
Digital/PWM
J4
1
DHT11
J5
1
Conn_01x16_Socket
J6
1
LEDSTRIP1
LEDSTRIP1
1
R_Potentiometer
RV1
1
220R
R1
1
330R
R2

Starfield-WX design files

The KiCad project lives in the marvyluvu/Starfield-WX repository on GitHub; these links point at the commit this page was built from.

Starfield-WX: common questions

How big is the Starfield-WX PCB?

The Starfield-WX measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Starfield-WX?

10 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Starfield-WX design files?

From the marvyluvu/Starfield-WX repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Starfield-WX design in my own project?

The repository has no license, so all rights stay with marvyluvu. Use it as a reference, and ask the author before reusing the design.

Similar boards