PIVFliFiattach
MastaTabs·PIVFliFiattach
About the PIVFliFiattach PCB
PIVFliFiattach is an open source PCB design by MastaTabs, published on GitHub under the Custom license license. It is a 4-layer board measuring 124 × 21 mm, with 16 components from 8 distinct parts.
Other key parts include the 74F378 and 74F32. By type, the board carries 5 ICs, 5 capacitors, 3 crystals, 2 resistors and 1 connector.
From the project
Recreation of PicassoIV FlickerFixer attachment/snap-off pcb for cards missing it.
This is a recreation from original data of the small snap off PCB of the PicassoIV (PIV) Amiga RTG graphics card. I created this because often cards seem to be sold without this PCB and then the FlickerFixer/ScanDoubler of the card cannot be used.
"PIV FlickerFixer attachment" is Open Hardware licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. This documentation is distributed as is and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES whatsoever with respect to its functionality, operability or use, including, without…

Main components on the PIVFliFiattach
PIVFliFiattach bill of materials (BOM)
16 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 74F378 | SOIC-16_3.9x9.9mm_Pitch1.27mm | IC26, IC27, IC28, IC29 |
| 1 | 74F32 | SOIC-14_3.9x8.7mm_Pitch1.27mm | IC30 |
| 1 | Conn_02x08_Odd_Even | Pin_Header_Straight_2x08_Pitch2.54mm | X20 |
| 1 | Conn_01x04 | Pin_Header_Straight_1x04_Pitch2.54mm | X22 |
| 1 | Conn_02x13_Odd_Even | Pin_Header_Straight_2x13_Pitch2.54mm | X26 |
| 1 | VideoSlotMulti | VideoSlotMulti_Edge | J1 |
| 5 | C_Small | C_0805_HandSoldering | C1, C2, C3, C4, C5 |
| 2 | R_Small | R_0805_HandSoldering | R133, R137 |
PIVFliFiattach design files
The KiCad project lives in the MastaTabs/PIVFliFiattach repository on GitHub; these links point at the commit this page was built from.
- LayoutPIV_FliFi_Slot.kicad_pcb
PIVFliFiattach: common questions
How big is the PIVFliFiattach PCB?
The PIVFliFiattach measures 124 × 21 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the PIVFliFiattach?
16 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the PIVFliFiattach design files?
From the MastaTabs/PIVFliFiattach repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PIVFliFiattach design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.