8 open source boards using the 74F32
Real designs built with the 74F32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
NuXT
monotech
184.9 × 243.8 mm214 parts4LGPL-3.0120C64-sram
jamarju
26.9 × 35.1 mm5 parts2LNo license62CompaqportableIII
raymondh2
194 × 170.6 mm123 parts2LNo license17PIVFliFiattach
MastaTabs
124 × 21 mm16 parts4LCustom license2Hydra-16
danstruthers
304.8 × 243.8 mm199 parts6LNo license1C64-sram full pinout
jamarju
26.7 × 34.9 mm5 parts2LNo license62CompaqPortableISACHASSIS
raymondh2
120.3 × 61.2 mm17 parts2LNo license17Z80RAM3
lynchaj
100 × 100 mm58 parts2LNo license31
How designs wire the 74F32
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74F32 connects to, and the resistors, capacitors and other passives placed on it.
- The 2A pin is tied to GND on 5 of 6 designs.
- The VCC pins have a decoupling capacitor on 4 of 6 designs, most often 100 nF.
- Pin 11 is left unconnected on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 2Apin 7 | Connected to: GND 83% · not connected 17% | — |
| VCCpin 8, 14 | Connected to: VCC 55% · a signal 36% |
|
| Pin 11 | Connected to: Not connected 60% · a signal 40% | — |
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NuXT by monotech, C64-sram by jamarju, Z80RAM3 by lynchaj and CompaqportableIII by raymondh2.
The 74F32 in open source designs
The gallery holds 8 open source boards using the 74F32 from 6 GitHub repositories; a typical one measures about 122.1 × 80.6 mm and carries around 38 components.
63% are two-layer designs, the rest use four layers or more, and 13% carry an open source license.
The most starred is NuXT by monotech.
Microcontrollers on boards using the 74F32
What boards using the 74F32 are built for
74F32: common questions
Where can I find a 74F32 reference design?
Each of the 8 boards on this page is a real design using the 74F32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74F32 2A pin connected?
The 2A pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 74F32.
What decoupling capacitors do designs use on the 74F32 VCC pin?
The VCC pins have a decoupling capacitor on 4 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the 74F32.
How is the 74F32 pin 11 connected?
Pin 11 is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the 74F32.
What parts are used alongside the 74F32?
The 74F00, 74F08, 74F244, 74F245 and 74LS14 appear in the most repositories here.
Which microcontrollers do boards using the 74F32 use?
Most are built on PIC (1).
How big is a typical board using the 74F32?
The median is 122.1 × 80.6 mm, and 63% are two-layer designs.
What is the most popular open source board using the 74F32?
By GitHub stars, NuXT by monotech, with 120 stars.
Can I simulate one of these boards using the 74F32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.