CrazyCar Prototype -IN DEVELOPMENT-
Matei2010·CrazyCar_Prototype_-IN_DEVELOPMENT-
About the CrazyCar Prototype -IN DEVELOPMENT- PCB
CrazyCar Prototype -IN DEVELOPMENT- is an open source STM32 PCB design by Matei2010, published on GitHub. It is a 2-layer board measuring 72 × 103 mm, with 57 components from 33 distinct parts.
Its main chip is the C5456218, from the STM32 family. Other key parts include the RZ7889, C50278, C130026, C83668 and C283467. By type, the board carries 17 resistors, 15 capacitors, 10 connectors, 9 ICs, 2 diodes and 1 transistor.
It belongs with the sensors designs in this gallery.
From the project
This is a self driving prototype in deveolpment car for the Crazy Car Competition at the FH Johanneum in Graz_Austria.
An autonomous miniature racing car in development for the Crazy Car Competition at FH JOANNEUM, Graz, Austria.
- Overview - Project Goals - Planned Hardware - Distance Sensing - Motor System - Active Suction and Downforce - Autonomous Driving - Repository Structure - Opening the CAD Project - Development Roadmap - Current Status - Contributing - License
CrazyCar is an autonomous miniature racing car project developed for the Crazy Car Competition at FH JOANNEUM in Graz, Austria.
Main components on the CrazyCar Prototype -IN DEVELOPMENT-
CrazyCar Prototype -IN DEVELOPMENT- bill of materials (BOM)
57 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | RZ7889 | SOIC127P600X175-8N | IC1, IC2 |
| 1 | C5456218 STM32C031C4Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | C50278 TMCS1100A3QDR | SOIC8_D_TEX | U2 |
| 1 | C130026 TMCS1100A3QDR | SOIC8_D_TEX | U3 |
| 1 | C83668 TCA9548APWR | TSSOP-24_4.4x7.8mm_P0.65mm | U4 |
| 1 | C83668 MPU-6500 | QFN40P300X300X95-25N | U5 |
| 1 | C283467 QRE1113GR | OnSemi_CASE100CY | U6 |
| 1 | C232862 LD1117V33 | TO-220-3_Horizontal_TabDown | U7 |
| 1 | C118538 2N3904 | TO-92_Inline | Q1 |
| 1 | C99102 SWD header | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 2 | C492401 Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J2, J3 |
| 3 | C492401 VL53L0X | PinHeader_1x05_P2.54mm_Vertical | J4, J5, J6 |
| 1 | C492400 VL53L0X | PinHeader_1x05_P2.54mm_Vertical | J7 |
| 1 | C49257 VL53L0X | PinHeader_1x05_P2.54mm_Vertical | J8 |
| 1 | C49257 Conn_01x02_Socket | AMASS_XT30U-F_1x02_P5.0mm_Vertical | J9 |
| 1 | C49257 Conn_01x02_Socket | PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | C96093 Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | C22383475 Push_Button | SW_PUSH_6mm | SW1 |
| 1 | C81598 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | V1 |
| 2 | C84256 LED | LED_0805_2012Metric | D1, D2 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | 100n | C_0805_2012Metric | C1, C2, C4, C5, C7, C8, C9, C12 +2 |
| 1 | 470uF | CP_Radial_D8.0mm_P3.50mm | C3 |
| 1 | 10n | C_0805_2012Metric | C6 |
| 1 | 1n | C_0805_2012Metric | C10 |
| 2 | 10u | C_0805_2012Metric | C11, C13 |
| 7 | 10k | R_0805_2012Metric | R1, R2, R3, R8, R10, R16, R17 |
| 2 | 100R | R_0805_2012Metric | R4, R5 |
| 2 | 4k7 | R_0805_2012Metric | R6, R7 |
| 1 | 33k | R_0805_2012Metric | R9 |
| 1 | 68R | R_0805_2012Metric | R11 |
| 1 | 47k | R_0805_2012Metric | R12 |
| 2 | 330R | R_0805_2012Metric | R13, R14 |
| 1 | 1k | R_0805_2012Metric | R15 |
CrazyCar Prototype -IN DEVELOPMENT- design files
The KiCad project lives in the Matei2010/CrazyCar_Prototype_-IN_DEVELOPMENT- repository on GitHub; these links point at the commit this page was built from.
- Layoutcarzycar.kicad_pcb
- Schematiccarzycar.kicad_sch
- BOMBOM.csv
CrazyCar Prototype -IN DEVELOPMENT-: common questions
What microcontroller does the CrazyCar Prototype -IN DEVELOPMENT- use?
The CrazyCar Prototype -IN DEVELOPMENT- is built around the C5456218, from the STM32 family.
How big is the CrazyCar Prototype -IN DEVELOPMENT- PCB?
The CrazyCar Prototype -IN DEVELOPMENT- measures 72 × 103 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CrazyCar Prototype -IN DEVELOPMENT-?
57 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CrazyCar Prototype -IN DEVELOPMENT- design files?
From the Matei2010/CrazyCar_Prototype_-IN_DEVELOPMENT- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CrazyCar Prototype -IN DEVELOPMENT- design in my own project?
The repository has no license, so all rights stay with Matei2010. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CrazyCar Prototype -IN DEVELOPMENT- without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k