InputBoard
mathe-mmr·AnaDash·hardware/inputBoard/inputBoard.kicad_pcb
About the InputBoard PCB
InputBoard is an open source PCB design by mathe-mmr, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 173 × 34 mm, with 12 components from 5 distinct parts.
By type, the board carries 9 switches and 3 connectors.
It belongs with the displays & leds designs in this gallery.
From the project
An cool looking dashboard for your PC!
This is an resource monitor for your PC, also featuring an macropad, inspired by Alex Bailey's system monitor and Hack Club's hackpad program! It allows you to take a quick glance and see your system information, while keeping the screen free for anything you do! This was made after watching , I've been wanting to make it for 2 years now! I also added an hackpad after seeing the very helpful

InputBoard bill of materials (BOM)
12 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LeftKeyConnector | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J101 |
| 1 | RightKeyConnector | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J102 |
| 1 | EncoderConnector | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J103 |
| 8 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW101, SW102, SW103, SW104, SW105, SW106, SW107, SW108 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW109 |
InputBoard design files
The KiCad project lives in the mathe-mmr/AnaDash repository on GitHub; these links point at the commit this page was built from.
InputBoard: common questions
How big is the InputBoard PCB?
The InputBoard measures 173 × 34 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the InputBoard?
12 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the InputBoard design files?
From the mathe-mmr/AnaDash repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the InputBoard design in my own project?
Yes, under the terms of its GPL-3.0 license, which mathe-mmr chose for the repository.
More boards in AnaDash
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k