Bridge rectifier 06
About the Bridge rectifier 06 PCB
Bridge rectifier 06 is an open source PCB design by matjutras, published on GitHub. It is a 2-layer board measuring 46.5 × 37.5 mm, with 10 components from 6 distinct parts.
By type, the board carries 5 diodes, 2 connectors, 2 resistors and 1 capacitor.
It belongs with the test & measurement designs in this gallery.
From the project
Educational electronics trainer: auto-generated schematics and 3D PCB views where you find an injected fault using a simulated multimeter, backed by real KiCad imports and ngspice simulation.
See CLAUDE.md for architecture and conventions.
Requires ngspice on PATH (sudo apt-get install ngspice) and kicad for kicad-cli (sudo apt-get install kicad).
map.json and faults.json under each devices//` are generated, not committed (see CLAUDE.md) — after a fresh checkout, regenerate them once per device:
Bridge rectifier 06 bill of materials (BOM)
10 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Screw_Terminal_01x02 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1, J2 |
| 4 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 1 | LED | LED_D5.0mm | D5 |
| 1 | 1000µF | CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 2.2k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
Bridge rectifier 06 design files
The KiCad project lives in the matjutras/faultfinder repository on GitHub; these links point at the commit this page was built from.
Bridge rectifier 06: common questions
How big is the Bridge rectifier 06 PCB?
The Bridge rectifier 06 measures 46.5 × 37.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bridge rectifier 06?
10 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bridge rectifier 06 design files?
From the matjutras/faultfinder repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bridge rectifier 06 design in my own project?
The repository has no license, so all rights stay with matjutras. Use it as a reference, and ask the author before reusing the design.
More boards in faultfinder
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
StackLink
52.3 × 10.5 mm5 parts2LGPL-3.05.0k
LevelShifter
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528
EleLab v2 Bus150
150 × 50 mm37 parts2LGPL-3.0528
EleLab v2 Frontpanel a
88 × 25 mm23 parts2LGPL-3.0528