Simple led 07
About the Simple led 07 PCB
Simple led 07 is an open source PCB design by matjutras, published on GitHub. It is a 2-layer board measuring 17.9 × 16.3 mm, with 11 components from 3 distinct parts.
By type, the board carries 5 diodes, 5 resistors and 1 connector.
It belongs with the test & measurement designs in this gallery.
From the project
Educational electronics trainer: auto-generated schematics and 3D PCB views where you find an injected fault using a simulated multimeter, backed by real KiCad imports and ngspice simulation.
See CLAUDE.md for architecture and conventions.
Requires ngspice on PATH (sudo apt-get install ngspice) and kicad for kicad-cli (sudo apt-get install kicad).
map.json and faults.json under each devices//` are generated, not committed (see CLAUDE.md) — after a fresh checkout, regenerate them once per device:
Simple led 07 bill of materials (BOM)
11 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Screw_Terminal_01x02 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1 |
| 5 | LED | LED_0805_2012Metric | D1, D2, D3, D4, D5 |
| 5 | 56R | R_0805_2012Metric | R1, R2, R3, R4, R5 |
Simple led 07 design files
The KiCad project lives in the matjutras/faultfinder repository on GitHub; these links point at the commit this page was built from.
Simple led 07: common questions
How big is the Simple led 07 PCB?
The Simple led 07 measures 17.9 × 16.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Simple led 07?
11 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Simple led 07 design files?
From the matjutras/faultfinder repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Simple led 07 design in my own project?
The repository has no license, so all rights stay with matjutras. Use it as a reference, and ask the author before reusing the design.
More boards in faultfinder
Fuzz pedal 11
81.3 × 62.4 mm68 parts2LNo license0
Soft power switch 10
15.8 × 11.1 mm13 parts2LNo license0
Bridge rectifier 06
46.5 × 37.5 mm10 parts2LNo license0
Battery protection 09
90 × 40 mm9 parts2LNo license0
Reverse polarity 08
8.2 × 9.9 mm5 parts2LNo license0
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
StackLink
52.3 × 10.5 mm5 parts2LGPL-3.05.0k
LevelShifter
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528
EleLab v2 Bus150
150 × 50 mm37 parts2LGPL-3.0528
EleLab v2 Frontpanel a
88 × 25 mm23 parts2LGPL-3.0528