Standalone pi loop
matterwaves·standalone_pi_loop
About the Standalone pi loop PCB
Standalone pi loop is an open source PCB design by matterwaves, published on GitHub. It is a 4-layer board measuring 100 × 100 mm, with 36 components from 24 distinct parts.
Other key parts include the AD823 and AD620. By type, the board carries 12 capacitors, 11 connectors, 8 resistors and 2 ICs.
Main components on the Standalone pi loop
Standalone pi loop bill of materials (BOM)
36 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD823 | DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | AD620 | DIP-8_W7.62mm_Socket_LongPads | U2 |
| 2 | CONN_01X10_PIN Conn_01x10_Pin | JST_ZH_B10B-ZR_1x10_P1.50mm_Vertical | J1, J2 |
| 1 | V-sense | SMA_Amphenol_132289_EdgeMount | J3 |
| 1 | CONN_01X05 Conn_01x05 | SolderWire-0.75sqmm_1x05_P4.8mm_D1.25mm_OD2.3mm | J4 |
| 1 | pot+ | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | pot- | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Setpoint | SMA_Amphenol_132289_EdgeMount | J7 |
| 1 | Alt out | SMA_Amphenol_132289_EdgeMount | J8 |
| 1 | Alt input | SMA_Amphenol_132289_EdgeMount | J9 |
| 1 | Vout | SMA_Amphenol_132289_EdgeMount | J10 |
| 1 | PI input select | PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | 10K 10k | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 2 | 500K 500k | Potentiometer_Bourns_3296W_Vertical | RV2, RV3 |
| 4 | 100N 100n | C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C4, C5 |
| 3 | 10N 10n | C_Disc_D4.3mm_W1.9mm_P5.00mm | C3, C6, C7 |
| 4 | 10U 10u | C_Disc_D4.3mm_W1.9mm_P5.00mm | C8, C9, C10, C11 |
| 1 | 1n | C_Disc_D4.3mm_W1.9mm_P5.00mm | C12 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | 3K3 3k3 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 47R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R7 |
| 1 | R_{gain} | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 100K 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 2.2K 2.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
Standalone pi loop design files
The KiCad project lives in the matterwaves/standalone_pi_loop repository on GitHub; these links point at the commit this page was built from.
Standalone pi loop: common questions
How big is the Standalone pi loop PCB?
The Standalone pi loop measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Standalone pi loop?
36 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Standalone pi loop design files?
From the matterwaves/standalone_pi_loop repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Standalone pi loop design in my own project?
The repository has no license, so all rights stay with matterwaves. Use it as a reference, and ask the author before reusing the design.