REVIUNG41
maxhbr·things·keyboards/reviung41/reviung41/pcb/ver1.4/reviung41.kicad_pcb
About the REVIUNG41 PCB
REVIUNG41 is an open source PCB design by maxhbr, published on GitHub. It is a 2-layer board measuring 253.8 × 107.2 mm, with 95 components from 6 distinct parts.
Other key parts include the ProMicro. By type, the board carries 41 switches, 41 diodes, 11 inductors and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
The REVIUNG41 is 41-key column staggered keyboard.
The REVIUNG41 is 41-key column staggered keyboard.
PCB --- 1 piece Top plate [PCB] --- 1 Silicon sheet --- 1 sheet Middle acrylic plate (top) --- 1 Middle acrylic plate (bottom) --- 1 Bottom plate --- 1 piece ProMicro protective plate --- 4 types Acrylic spacer --- 3 pieces Spacer --- 11 pieces M2 screw 4mm --- 22 pcs M2 screw 10mm --- 3 pcs M2 nut --- 3 pcs Rubber feet --- 6 pieces Diode [1N4148 SMD] --- 41 pieces PCB socket for switch --- 41 pcs Tact switch --- 1 piece LED [WS2812B] --- 11 pieces Stabilizer --- 1 piece

Main components on the REVIUNG41
REVIUNG41 bill of materials (BOM)
95 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ProMicro | ProMicro | U1 |
| 1 | SW_PUSH | ResetSW_1side | RESET1 |
| 40 | SW_PUSH | MXOnly-1U-Hotswap | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +32 |
| 1 | SW_2U_PUSH | MXOnly-2U-Hotswap-ReversedStabilizers | SW39 |
| 41 | 1N4148W | D3_SMD_1side | D1, D2, D3, D4, D5, D6, D7, D8 +33 |
| 11 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | L1, L2, L3, L4, L5, L6, L7, L8 +3 |
REVIUNG41 design files
The KiCad project lives in the maxhbr/things repository on GitHub; these links point at the commit this page was built from.
REVIUNG41: common questions
How big is the REVIUNG41 PCB?
The REVIUNG41 measures 253.8 × 107.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the REVIUNG41?
95 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the REVIUNG41 design files?
From the maxhbr/things repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the REVIUNG41 design in my own project?
The repository has no license, so all rights stay with maxhbr. Use it as a reference, and ask the author before reusing the design.