Simul
maximmalin·simul·out/board.kicad_pcb
About the Simul PCB
Simul is an open source STM32 PCB design by maximmalin, published on GitHub under the MIT license. It is a 4-layer board measuring 88.6 × 85.1 mm, with 36 components from 21 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. By type, the board carries 1 IC, 1 crystal and 1 inductor.
It belongs with the rf & radio designs in this gallery.
From the project
opensource combination of agent driven hardware development tools
A zero-IF (direct-conversion) software-defined-radio receiver built around an STM32F103C8T6 "Blue Pill". The board, the analog RF chain, the firmware, and the antennas are all described by code and verified by simulation. The headline capability is a working analog/digital co-simulation: a real ngspice netlist wrapped as an FMI 2.0 FMU, hard-locked to a firmware model — and, on the QEMU path, to the real firmware binary.
Main components on the Simul
Simul bill of materials (BOM)
36 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8T6 | STM32F103C8T6 | U1 |
| 1 | 8MHz | 8MHz | Y1 |
| 1 | 10u | 10u | C_ANA1 |
| 5 | 100n | 100n | C_ANA2, C_LDO2, C_MCU1, C_MCU2, C_MIX3 |
| 4 | 100p | 100p | C_BS1, C_LNA1, C_MIX1, C_MIX2 |
| 1 | 10p | 10p | C_BS2 |
| 2 | 100u | 100u | C_LDO1, L_BS1 |
| 1 | 4u7 | 4u7 | C_MCU3 |
| 2 | 22p | 22p | C_OSC1, C_OSC2 |
| 2 | 18u | 18u | L_LNA1, L_LNA2 |
| 2 | 2N7002 | 2N7002 | Q_LNA1, Q_LNA2 |
| 2 | 10k | 10k | R_G1, R_G2 |
| 1 | 4k7 | 4k7 | R_G3 |
| 1 | 2k2 | 2k2 | R_G4 |
| 2 | 1k | 1k | R_S1, R_S2 |
| 2 | 22 | 22 | R_USB1, R_USB2 |
| 2 | TESTPOINT | TESTPOINT | TP_LNA1_D, TP_LNA2_D |
| 1 | LT5560 | LT5560 | U_MIX1 |
| 1 | OPA2134 | OPA2134 | U_OP1 |
| 1 | LPJ-1 | LPJ-1 | X_QWC1 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 600R@100MHz | 600R_100MHz | FB1 |
Simul design files
The KiCad project lives in the maximmalin/simul repository on GitHub; these links point at the commit this page was built from.
- Layoutout/board.kicad_pcb
- BOMout/bom.csv
Simul: common questions
What microcontroller does the Simul use?
The Simul is built around the STM32F103C8T6, from the STM32 family.
How big is the Simul PCB?
The Simul measures 88.6 × 85.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Simul?
36 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Simul design files?
From the maximmalin/simul repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Simul design in my own project?
Yes, under the terms of its MIT license, which maximmalin chose for the repository.
Can I test firmware for the Simul without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k