DevPot v2
About the DevPot v2 PCB
DevPot v2 is an open source PCB design by MBI-Ignitions, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 52.6 × 31 mm, with 26 components from 17 distinct parts.
By type, the board carries 8 connectors, 7 capacitors, 5 diodes and 1 transistor.
From the project
Repository for uploading ignition system information
Some designs also have themistors or thermal resistors. These are to change the timing depending the ambient temperature.
DevPot v2 bill of materials (BOM)
26 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TIC106 | TO-220-3_Vertical | Q1 |
| 1 | MAG | SolderWire-2.5sqmm_1x02_P7.2mm_D2.4mm_OD3.6mm | J1 |
| 1 | lD | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | J2 |
| 1 | GtD | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | J3 |
| 1 | scrD | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | J4 |
| 1 | AtG | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | J5 |
| 1 | COIL | SolderWire-2.5sqmm_1x02_P7.2mm_D2.4mm_OD3.6mm | J6 |
| 1 | aD | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | J7 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | J8 |
| 2 | 50 | Potentiometer_Bourns_3296W_Vertical | RV1, RV3 |
| 1 | 2k | Potentiometer_Bourns_3296W_Vertical | RV2 |
| 1 | 500 | Potentiometer_Bourns_3296W_Vertical | RV4 |
| 1 | 1k | Potentiometer_Bourns_3296W_Vertical | RV5 |
| 5 | 1N4007 | D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2, D3, D4, D5 |
| 1 | 1u | C_Rect_L26.5mm_W10.5mm_P22.50mm_MKS4 | C1 |
| 4 | 0.47U 0.47u | CP_Radial_Tantal_D5.5mm_P2.50mm | C2, C3, C4, C7 |
| 2 | 4.7U 4.7u | CP_Radial_Tantal_D5.5mm_P2.50mm | C5, C6 |
DevPot v2 design files
The KiCad project lives in the MBI-Ignitions/MBI_Ignition_Systems repository on GitHub; these links point at the commit this page was built from.
DevPot v2: common questions
How big is the DevPot v2 PCB?
The DevPot v2 measures 52.6 × 31 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DevPot v2?
26 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DevPot v2 design files?
From the MBI-Ignitions/MBI_Ignition_Systems repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DevPot v2 design in my own project?
Yes, under the terms of its GPL-3.0 license, which MBI-Ignitions chose for the repository.
More boards in MBI_Ignition_Systems
Earlier revisions in the repo: DevPot