Jaguar
About the Jaguar PCB
Jaguar is an open source PCB design by MBI-Ignitions, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 45.2 × 32 mm, with 22 components from 20 distinct parts.
By type, the board carries 8 resistors, 5 diodes, 4 capacitors, 2 connectors, 2 jumpers and 1 transistor.
From the project
Repository for uploading ignition system information
Some designs also have themistors or thermal resistors. These are to change the timing depending the ambient temperature.
Jaguar bill of materials (BOM)
22 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TIC106 | TO-220-3_Vertical | Q1 |
| 1 | COIL | SolderWire-2.5sqmm_1x02_P7.2mm_D2.4mm_OD3.6mm | J1 |
| 1 | MAG | SolderWire-2.5sqmm_1x02_P7.2mm_D2.4mm_OD3.6mm | J2 |
| 2 | Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP1, JP2 |
| 2 | 1N4007 | D_DO-41_SOD81_P7.62mm_Horizontal | D1, D4 |
| 1 | SA5.0A-TP 1N4007 | D_DO-41_SOD81_P7.62mm_Horizontal | D2 |
| 1 | 1N5819 1N4007 | D_DO-41_SOD81_P7.62mm_Horizontal | D3 |
| 1 | 1N4007 | D_DO-41_SOD81_P7.62mm_Horizontal | D5 |
| 1 | 10U 1u | C_Rect_L26.5mm_W10.5mm_P22.50mm_MKS4 | C1 |
| 1 | 4.7u | CP_Radial_Tantal_D5.5mm_P5.00mm | C4 |
| 1 | 10N 0.47u | CP_Radial_Tantal_D5.5mm_P5.00mm | C5 |
| 1 | 0.47u | CP_Radial_Tantal_D5.5mm_P5.00mm | C6 |
| 1 | 33 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 220 16 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 220 120 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 220 7.5k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 680 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
Jaguar design files
The KiCad project lives in the MBI-Ignitions/MBI_Ignition_Systems repository on GitHub; these links point at the commit this page was built from.
Jaguar: common questions
How big is the Jaguar PCB?
The Jaguar measures 45.2 × 32 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jaguar?
22 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Jaguar design files?
From the MBI-Ignitions/MBI_Ignition_Systems repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Jaguar design in my own project?
Yes, under the terms of its GPL-3.0 license, which MBI-Ignitions chose for the repository.
