0001-555-latches
mc-hw·0001-555-latches·0001-555-latches/0001-555-latches.kicad_pcb
About the 0001-555-latches PCB
0001-555-latches is an open source PCB design by mc-hw, published on GitHub. It is a 2-layer board measuring 88 × 75 mm, with 33 components from 15 distinct parts.
Other key parts include the NE555P. By type, the board carries 12 resistors, 5 capacitors, 4 connectors, 3 ICs, 3 switches and 3 diodes.
From the project
Monostable, bistable, astable latches build with 555 integrated circuit
The circuit contains of three latches: astable, monostable and bistable. Each of them is built around a separate 555 integrated circuit with configurable parameters.
The astable latch is built around integrated circuit U1. Potentiometers RV1 and RV2, together with resistors R1, R2 and capacitor C1 regulate the frequency and duty cycle of the ASTBLOUT output signal according to 555 Timer Calculator. The frequency range is 1Hz-1kHz. The ASTBLOUT signal is provided to screw connector J2. The state of ASTBLOUT` signal is visualised with D1 LED.

Main components on the 0001-555-latches
0001-555-latches bill of materials (BOM)
33 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | NE555P | DIP-8_W7.62mm_Socket_LongPads | U1, U2, U3 |
| 1 | DC_IN | BarrelJack_Horizontal | J1 |
| 1 | ASTBL_OUT | TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J2 |
| 1 | BSTBL_OUT | TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J3 |
| 1 | MSTBL_OUT | TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J4 |
| 3 | 1M | Potentiometer_Runtron_RM-065_Vertical | RV1, RV2, RV3 |
| 3 | SW_Push | SW_PUSH_6mm_H4.3mm | SW1, SW2, SW3 |
| 1 | RED | LED_D5.0mm | D1 |
| 1 | GREEN | LED_D5.0mm | D2 |
| 1 | YELLOW | LED_D5.0mm | D3 |
| 1 | 470nF | C_Rect_L7.0mm_W3.5mm_P5.00mm | C1 |
| 3 | 10nF | C_Rect_L7.0mm_W3.5mm_P5.00mm | C2, C3, C5 |
| 1 | 22uF | CP_Radial_D5.0mm_P2.00mm | C4 |
| 6 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R6, R7, R8, R9 |
| 6 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R5, R10, R11, R12 |
0001-555-latches design files
The KiCad project lives in the mc-hw/0001-555-latches repository on GitHub; these links point at the commit this page was built from.
0001-555-latches: common questions
How big is the 0001-555-latches PCB?
The 0001-555-latches measures 88 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 0001-555-latches?
33 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the 0001-555-latches design files?
From the mc-hw/0001-555-latches repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 0001-555-latches design in my own project?
The repository has no license, so all rights stay with mc-hw. Use it as a reference, and ask the author before reusing the design.