Boostcircuit board.svg
About the Boostcircuit board.svg
Boostcircuit board.svg is an open source PCB design by mcqn, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 38.1 × 22.9 mm, with 10 components from 9 distinct parts.
Other key parts include the FP6276B. By type, the board carries 4 capacitors, 4 resistors, 1 IC and 1 inductor.
From the project
My Baby's Got LED, bike edition
The hardware for MBiGL is based around the ESP32 C3 Mini
Code can be uploaded via USB serial or with an external UART board via J31 (six pin header). More details on the Espressif website
There are four pins available for RGB data output. LEDdata (IO5) and LEDclock (IO6) are the primary outputs. IO3 and IO4 are not connected to the level shifter (U4) by default but can be used as additional channels by bridging JP42 and JP43 with solder if required.
Main components on the Boostcircuit board.svg
Boostcircuit board.svg bill of materials (BOM)
10 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FP6276B | SOP-8-1EP_4.57x4.57mm_P1.27mm_EP4.57x4.45mm_ThermalVias | U1 |
| 1 | 3.3uH | L_Vishay_IHLP-2525 | L1 |
| 2 | 22uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3 |
| 1 | 100uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 1nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | 7k5 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 43K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
Boostcircuit board.svg design files
The KiCad project lives in the mcqn/my-bikes-got-led repository on GitHub; these links point at the commit this page was built from.
Boostcircuit board.svg: common questions
How big is the Boostcircuit board.svg?
The Boostcircuit board.svg measures 38.1 × 22.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Boostcircuit board.svg?
10 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Boostcircuit board.svg design files?
From the mcqn/my-bikes-got-led repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Boostcircuit board.svg design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which mcqn chose for the repository.
