HardLabs

ErgoDecks

meepodeep·ErgoDecks·ErgoDecks/ErgoDecks.kicad_pcb

ErgoDecks PCB layout, top view — open source board by meepodeep
Simulate this board

About the ErgoDecks PCB

ErgoDecks is an open source PCB design by meepodeep, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 121.5 × 99.5 mm, with 35 components from 3 distinct parts.

Other key parts include the nice_nano. By type, the board carries 17 relays, 17 diodes and 1 IC.

It belongs with the keyboards designs in this gallery.

From the project

split ergo keyboard

- ## Assembly - Solder diodes onto the PCB. - Solder switches onto the PCB. - Solder microcontrollers onto the pcb. - Solder the battery to the bat terminals on the mcu. - Attach the battery using double sided tape to the bottom half of the case in the battery area. - - Use m3 bolts to secure the pcb and top case to the bottom half of the case.

- ## Software - download the firmware.zip file and flash the left file to the left half and the right file to the right half by dragging and dropping it into the virtual disk on the MCUs in bootloader mode.

ErgoDecks, from the project README
From the project README

Main components on the ErgoDecks

nice_nano

ErgoDecks bill of materials (BOM)

35 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
nice_nano
U1
17
KEYSW
K1, K2, K3, K4, K5, K6, K7, K8 +9
17
~
D1, D2, D3, D4, D5, D6, D7, D8 +9

ErgoDecks design files

The KiCad project lives in the meepodeep/ErgoDecks repository on GitHub; these links point at the commit this page was built from.

ErgoDecks: common questions

How big is the ErgoDecks PCB?

The ErgoDecks measures 121.5 × 99.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ErgoDecks?

35 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ErgoDecks design files?

From the meepodeep/ErgoDecks repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ErgoDecks design in my own project?

Yes, under the terms of its GPL-3.0 license, which meepodeep chose for the repository.

Similar boards