49 open source boards using the nice_nano
Real designs built with the nice_nano, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Main
duckyb
221.6 × 89.6 mm84 parts2LMIT595Temper
raeedcho
111.3 × 90 mm41 parts2LCERN-OHL-P-2.0482KLOTZ split keyboard
GEIGEIGEIST
120.6 × 85.5 mm50 parts2LGPL-3.0285Tairakb
strayer
151.5 × 121.2 mm70 parts2LMIT161UT22
bubbleology
214.6 × 84.4 mm50 parts2LNo license53Fract
skarrmann
180 × 75 mm72 parts2LMIT34PLA NCK
shanna
118.7 × 103.8 mm54 parts2LNo license32Pteron56v04-NN-palm-E
Kraken-Jokes
301.7 × 154 mm123 parts2LGPL-3.030Puffer
DuBento
116.1 × 92.5 mm42 parts2LCERN-OHL-P-2.017RP2040/RP2350
Vulpes minora
sadekbaroudi
124.7 × 96.1 mm67 parts2LNo license14ByranTK-Alpha
byrantech
313.1 × 121.4 mm164 parts2LMIT13Tackle
skarrmann
158 × 119 mm100 parts2LMIT9Kicad padavan
kilipan
328.6 × 81 mm137 parts2LCERN-OHL-S-2.07Ebbe34
indianpojken
249.3 × 113 mm72 parts2LNo license7- schematic only · 73 parts
Hollow-Wood
Mefred
73 partsCustom license6 Didot
idan
156.2 × 118.1 mm66 parts2LNo license5Ghoost Board
Broccoliux
319 × 142.5 mm359 parts2LNo license3Nexus
HashirX-ux
133.5 × 86 mm70 parts2LMIT2Deltavr controller
oxy-2
70 × 70 mm46 parts2LMIT2AVR/Arduino
Neolexis
rhettjay
141 × 103.6 mm121 parts2LGPL-3.01Kevin
seb-ma
208.3 × 104.4 mm84 parts2LMIT1ErgoDecks
meepodeep
121.5 × 99.5 mm35 parts2LGPL-3.01Nordic nRF
Fantastic node
LJBoxx
31.7 × 45 mm21 parts2LMIT1Kicad Project
elfyndor203
336 × 122 mm175 parts2LMIT0Atari
Tschibo00
228 × 99.5 mm165 parts2LMIT0Nordic nRF
Td40
NLTD2010
280.1 × 81.3 mm142 parts2LMIT0YetAnotherKeyboard
0x62b
329.8 × 98.2 mm134 parts2LNo license0Nordic nRF
Prototype mk1 panel
H0N3YC4T
320 × 126 mm126 parts2LNo license0ASME Electrical Powerchair Computer Integration
MeeraBh
138 × 71.3 mm110 parts2LNo license0ModuPad v2
lassiipk
95.3 × 114.3 mm86 parts2LNo license0Split keyboard
Hibernathan1212
138.7 × 107.8 mm55 parts2LNo license0Engine meter
andrewsargent2311-web
88.3 × 80.3 mm44 parts2LGPL-3.00Mouse
lordor5
45 × 45 mm31 parts2LNo license0ESP32
Meshbee hardware
fablab-imperia
42.5 × 164 mm23 parts2LCERN-OHL-S-2.00Nice nano mesh
Straverk
88 × 42.2 mm16 parts2LGPL-3.00Bumwings v001R64 nano sd
tubbytwins
344.6 × 141.3 mm132 parts2LMIT22
How designs wire the nice_nano
Read from the KiCad layouts of 41 open source designs, one per repository: what each pin of the nice_nano connects to, and the resistors, capacitors and other passives placed on it.
- The RX1/P0.08 pin is left unconnected on 26 of 41 designs (a signal on 15).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RX1/P0.08pin 2 | Connected to: Not connected 63% · a signal 37% | — |
| GNDpin 3, 4, 23 | Connected to: GND 79% | — |
| VCCpin 21 | Connected to: VCC 66% · not connected 22% | — |
22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Main by duckyb, Temper by raeedcho, KLOTZ split keyboard by GEIGEIGEIST and Tairakb by strayer.
The nice_nano in open source designs
The gallery holds 49 open source boards using the nice_nano from 42 GitHub repositories; a typical one measures about 146.2 × 98.9 mm and carries around 72 components.
100% are two-layer designs, the rest use four layers or more, and 61% carry an open source license.
The most starred is Main by duckyb.
Parts used alongside the nice_nano
Microcontrollers on boards using the nice_nano
What boards using the nice_nano are built for
nice_nano: common questions
Where can I find a nice_nano reference design?
Each of the 49 boards on this page is a real design using the nice_nano. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the nice_nano RX1/P0.08 pin connected?
The RX1/P0.08 pin is left unconnected on 26 of 41 designs (a signal on 15). Counted from the KiCad layouts of 41 open source designs using the nice_nano.
Which microcontrollers do boards using the nice_nano use?
Most are built on Nordic nRF (3), AVR/Arduino (1), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the nice_nano?
The median is 146.2 × 98.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the nice_nano?
By GitHub stars, Main by duckyb, with 595 stars.
Can I simulate one of these boards using the nice_nano before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.