Power rail mosfet switch

mekatrol·electronics·hardware/power_rail_mosfet_switch/power_rail_mosfet_switch.kicad_pcb

Power rail mosfet switch PCB layout, top view — open source board by mekatrol

About the Power rail mosfet switch PCB

Power rail mosfet switch is an open source PCB design by mekatrol, published on GitHub. It is a 2-layer board measuring 20 × 10 mm, with 8 components from 8 distinct parts.

By type, the board carries 3 resistors, 2 transistors, 2 connectors and 1 capacitor.

From the project

This repository contains the electronics, embedded firmware, support software, and reference material for a collection of home-automation and workshop projects. Hardware designs are primarily created with KiCad, firmware targets Raspberry Pi Pico/Pico W and MicroPython-compatible

This repository contains the electronics, embedded firmware, support software, and reference material for a collection of home-automation and workshop projects. Hardware designs are primarily created with KiCad, firmware targets Raspberry Pi Pico/Pico W and MicroPython-compatible boards, and the host-side controller tools are written in .NET, C++, and Python.

Power rail mosfet switch bill of materials (BOM)

8 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
HXY2102EI
Q1
1
AO3401A
Q2
1
Conn_01x03_Pin
J1
1
Conn_01x02_Pin
J2
1
100n
C1
1
1k
R1
1
100k
R2
1
47k
R3

Power rail mosfet switch design files

The KiCad project lives in the mekatrol/electronics repository on GitHub; these links point at the commit this page was built from.

Power rail mosfet switch: common questions

How big is the Power rail mosfet switch PCB?

The Power rail mosfet switch measures 20 × 10 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Power rail mosfet switch?

8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Power rail mosfet switch design files?

From the mekatrol/electronics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Power rail mosfet switch design in my own project?

The repository has no license, so all rights stay with mekatrol. Use it as a reference, and ask the author before reusing the design.

More boards in electronics