HardLabs

Triac fet module

mekatrol·electronics·hardware/triac_fet_module/triac_fet_module.kicad_pcb

Triac fet module layout, top view — open source board by mekatrol
Simulate this board

About the Triac fet module

Triac fet module is an open source PCB design by mekatrol, published on GitHub. It is a 2-layer board measuring 60 × 25 mm, with 11 components from 11 distinct parts.

Other key parts include the MOC3063M. By type, the board carries 4 resistors, 2 connectors, 2 diodes, 1 IC, 1 transistor and 1 capacitor.

From the project

This repository contains the electronics, embedded firmware, support software, and reference material for a collection of home-automation and workshop projects. Hardware designs are primarily created with KiCad, firmware targets Raspberry Pi Pico/Pico W and MicroPython-compatible

This repository contains the electronics, embedded firmware, support software, and reference material for a collection of home-automation and workshop projects. Hardware designs are primarily created with KiCad, firmware targets Raspberry Pi Pico/Pico W and MicroPython-compatible boards, and the host-side controller tools are written in .NET, C++, and Python.

Main components on the Triac fet module

MOC3063M

Triac fet module bill of materials (BOM)

11 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MOC3063M
U1
1
BT136-800
Q1
1
Conn_01x02_Pin
J1
1
Screw_Terminal_01x02
J2
1
LED
D1
1
SMAJ48CA
D2
1
100n
C1
1
220R
R1
1
470R
R2
1
330R
R3
1
47R
R4

Triac fet module design files

The KiCad project lives in the mekatrol/electronics repository on GitHub; these links point at the commit this page was built from.

Triac fet module: common questions

How big is the Triac fet module?

The Triac fet module measures 60 × 25 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Triac fet module?

11 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Triac fet module design files?

From the mekatrol/electronics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Triac fet module design in my own project?

The repository has no license, so all rights stay with mekatrol. Use it as a reference, and ask the author before reusing the design.

More boards in electronics