Univermain
mememan5868·2026-NroboB·crc/univermain/univermain.kicad_pcb
About the Univermain PCB
Univermain is an open source STM32 PCB design by mememan5868, published on GitHub. It is a 2-layer board measuring 74.4 × 37.2 mm, with 13 components from 7 distinct parts.
Its main chip is the STM32F446RETX, from the STM32 family. Other key parts include the MCP2561-E-P and MCP2561-E-SN. By type, the board carries 8 connectors, 3 ICs and 2 resistors.
Main components on the Univermain
Univermain bill of materials (BOM)
13 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F446RETX NUCLEO-F446RE | MODULE_NUCLEO-F446RE | U1 |
| 1 | MCP2561-E-P | DIP-8_W7.62mm | U2 |
| 1 | MCP2561-E-SN MCP2561-E-P | DIP-8_W7.62mm | U3 |
| 2 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1, J2 |
| 2 | CONN_01X02 Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3, J4 |
| 4 | Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J9, J10, J11, J12 |
| 2 | 10K 120 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
Univermain design files
The KiCad project lives in the mememan5868/2026-NroboB repository on GitHub; these links point at the commit this page was built from.
Univermain: common questions
What microcontroller does the Univermain use?
The Univermain is built around the STM32F446RETX, from the STM32 family.
How big is the Univermain PCB?
The Univermain measures 74.4 × 37.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Univermain?
13 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Univermain design files?
From the mememan5868/2026-NroboB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Univermain design in my own project?
The repository has no license, so all rights stay with mememan5868. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Univermain without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in 2026-NroboB
STM32
2026B-main
mememan5868
96.8 × 65 mm47 parts2LNo license0STM32
ISS MD SUB
mememan5868
39.6 × 64 mm31 parts2LNo license0STM32
ISS MD SUB-3
mememan5868
33.8 × 75.1 mm30 parts2LNo license0STM32
ISS MD SUB-2
mememan5868
33.8 × 75.1 mm30 parts2LNo license0STM32
2026-Node
mememan5868
37 × 63 mm28 parts2LNo license0
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k