47 open source boards using the STM32F446RETX
Real designs built with the STM32F446RETX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
CawDrive
noxrick91
50 × 42 mm96 parts4LGPL-3.0107STM32
Oscar components
dchwebb
71 × 100 mm63 parts4LUnlicense41STM32
Overnumpad controller 1xb
purdeaandrei
69.6 × 37.3 mm65 parts2LCERN-OHL-P-2.027ESP32
VCU
sufst
194.3 × 92.8 mm205 parts4LGPL-3.019STM32
MidiMonger components
dchwebb
40 × 100 mm64 parts2LNo license12STM32
Iskander
M-K-O-Hybrid-open-source
81.5 × 47 mm62 parts2LMIT12STM32
Crazyflie audio
LCAV
133 × 133 mm113 parts2LMIT9STM32
Light Commander
ethandrzb
70.2 × 108 mm163 parts6LNo license2STM32
PMSM driver
Mohamed-Ashrf
81.5 × 47 mm62 parts2LMIT2STM32
Mother Ctrl
Tomoshibi-technology
100 × 60 mm248 parts2LMIT1STM32
FLIGHT-CONTROLLER-PUSHPAK--2026
iamneerajverma001
40 × 40 mm74 parts4LMIT1STM32
RoboRyo
KaitoTLex
64.3 × 115.8 mm68 parts4LMIT1STM32
ExtensionBoard
ovgu-FINken
45 × 60 mm53 parts2LNo license1STM32
Walky Talky
zmuhammad07
57.1 × 59.6 mm45 parts2LMIT1STM32
Krieger
tk20dk
80 × 47 mm33 parts4LMIT1ESP32
MAINBOARD PCB - 1 OF 3
SSkrzypik03
178.1 × 97.2 mm312 parts6LNo license0STM32
ICE-EngineControlUnit
ASURacingTeam
100 × 100 mm295 parts2LNo license0STM32
Audio-DSP-Guitar-Pedal
Jonkaphi
136 × 186 mm260 parts4LNo license0STM32
Digital amplifier2
bybzmt
94 × 120 mm233 parts4LNo license0STM32
Arsenal
shadedvox
163 × 83 mm173 parts4LApache-2.00STM32
MainBoard V3 2
banbatakumi
56 × 65 mm145 parts2LNo license0STM32
STM32-Hexapod-Controller
ZSP-Electronics
83.5 × 69 mm103 parts4LNo license0STM32
HexArm
HexFud
124.4 × 115.3 mm91 parts4LNo license0STM32
02-LINE
tuton-RCJ
81 × 52 mm74 parts2LMIT0STM32
Den v3
makizusi
98 × 98 mm57 parts2LNo license0STM32
Pcb project mh
mhaftarc
85 × 60 mm53 parts2LNo license0STM32
Force feedback vr glove
yoonytunes
72.1 × 81.7 mm53 parts2LNo license0STM32
2026B-main
mememan5868
96.8 × 65 mm47 parts2LNo license0STM32
Board a main
sashankthapa
40 × 25 mm23 parts2LNo license0- schematic only · 67 partsESP32
ROCKET-Spica
yumeno-robot
67 partsNo license0 STM32
MidiMonger
dchwebb
40 × 110 mm56 parts2LNo license12STM32
Common Control
Tomoshibi-technology
110 × 120 mm219 parts2LMIT0ESP32
Main
Thrcot
100 × 66 mm108 parts2LNo license0STM32
01-MAIN
tuton-RCJ
130 × 146 mm68 parts2LMIT0STM32
DM v3
makizusi
98 × 98 mm57 parts2LNo license0STM32
Main
Tomoshibi-technology
110 × 120 mm200 parts2LMIT0
How designs wire the STM32F446RETX
Read from the KiCad layouts of 32 open source designs, one per repository: what each pin of the STM32F446RETX connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pins have a decoupling capacitor on 27 of 31 designs, most often 100 nF (then 10 µF).
- The VCAP_1 pin has a capacitor to GND on 26 of 30 designs, most often 4.7 µF (then 2.2 µF).
- The VDDA pin has a decoupling capacitor on 25 of 32 designs, most often 100 nF (then 1 µF).
- The NRST pin has a capacitor to GND on 24 of 32 designs, most often 100 nF (then 1 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 78% |
|
| PC15pin 4 | Connected to: Not connected 63% · a signal 38% | — |
| PH0pin 5 | Connected to: Signal 75% · not connected 22% |
|
| PH1pin 6 | Connected to: Signal 75% · not connected 25% |
|
| NRSTpin 7 | Connected to: A connector 53% |
|
| VSSApin 12 | Connected to: GND 91% | — |
| VDDApin 13 | Connected to: 3.3V 66% · a signal 25% |
|
| VSSpin 18, 31, 47, 63 | Connected to: GND 100% | — |
| VDDpin 19, 32, 48, 64 | Connected to: 3.3V 93% |
|
| PB2pin 28 | Connected to: Signal 73% · not connected 23% |
|
| VCAP_1pin 30 | Connected to: Signal 87% |
|
| PB6pin 58 | Connected to: A connector 40% · not connected 20% |
|
| BOOT0pin 60 | Connected to: Signal 87% |
|
45 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CawDrive by noxrick91, Oscar components by dchwebb, Overnumpad controller 1xb by purdeaandrei and VCU by sufst.
The STM32F446RETX in open source designs
The gallery holds 47 open source boards using the STM32F446RETX from 33 GitHub repositories; a typical one measures about 92 × 72.5 mm and carries around 65 components.
72% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.
The most starred is CawDrive by noxrick91.
Parts used alongside the STM32F446RETX
What boards using the STM32F446RETX are built for
STM32F446RETX: common questions
Where can I find a STM32F446RETX reference design?
Each of the 47 boards on this page is a real design using the STM32F446RETX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32F446RETX VDD pin?
The VDD pins have a decoupling capacitor on 27 of 31 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 32 open source designs using the STM32F446RETX.
How is the STM32F446RETX VCAP_1 pin connected?
The VCAP_1 pin has a capacitor to GND on 26 of 30 designs, most often 4.7 µF (then 2.2 µF). Counted from the KiCad layouts of 32 open source designs using the STM32F446RETX.
What decoupling capacitors do designs use on the STM32F446RETX VDDA pin?
The VDDA pin has a decoupling capacitor on 25 of 32 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 32 open source designs using the STM32F446RETX.
What parts are used alongside the STM32F446RETX?
The AMS1117-3.3, USBLC6-2SC6, AP2112K-3.3, AZ1117CH-3.3TRG1 and CH340E appear in the most repositories here.
Which microcontrollers do boards using the STM32F446RETX use?
Most are built on STM32 (43) and ESP32 (4).
How big is a typical board using the STM32F446RETX?
The median is 92 × 72.5 mm, and 72% are two-layer designs.
What is the most popular open source board using the STM32F446RETX?
By GitHub stars, CawDrive by noxrick91, with 107 stars.
Can I simulate one of these boards using the STM32F446RETX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.